Description

The MB5B INFRARED is an extra-large, highly configurable front-access meter bag in the new black and red color scheme. It features an external daisy chain for attaching pouches or accessories. The bag can be worn over both shoulders with the included, removable backpack straps, over one shoulder with the optional padded shoulder strap, or at your side with the over-molded gripped handle. The outside of the bag includes 8 pockets on the front flap and a padded tablet computer pocket on the back. The MB5B INFRARED also features our proprietary V-SWAP™ system of interchangeable panels, allowing you to customize the internal storage layout.

The MB5B INFRARED edition COMES WITH THE LARGE SIDE POCKET INSERTS, THE FRONT TOOL PANEL, AND THE REAR TOOL PANEL, ALL AS SHOWN BELOW. Additional panels are available and sold separately.

 

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

MB5B INFRARED PRODUCT SHEET