Tool bags
Tool Storage
Made in USA
Tool Bags By Trade
Everyday Carry
Find A Dealer
TECH-TTVPP10315
From $219.99
The TECH-TT tool tote has two exterior ‘shop walls’ and open access to all interior tool pockets. With a waterproof plastic base, the TECH-TT is designed for quick and easy access to hand tools as well as larger tools. The two removable V-SWAP™ pocket panels are included with your purchase and enable customizing the interior. You may purchase additional panels as you like to accommodate more arrangements. A tape measure, small driver or Veto pouch can attach to the stainless mounting clip.
In stock
Description
The TECH-TT provides two exterior ‘shop walls’ of tool storage along with open access to all interior tool pockets – keeping gear visible and accessible. Built on a waterproof plastic base the TECH-TT is designed for any tradesperson or technician to quickly store hand tools in vertical pockets as well as larger tools in the center bulk storage section of the bag. The two removable V-SWAP™ pocket panels are included with your purchase and enable customizing the interior for creating more or less bulk storage capacity. You may purchase additional panels as you like to accommodate more arrangements. A tape measure, small driver or Veto pouch can attach to the stainless mounting clip.
Specification
PRODUCT SPECIFICATIONS:
- Height: 13" (33cm)
- Width: 16.5" (42cm)
- Depth: 7” (18cm)
- Weight (empty): 7lbs (3kg)
- Max Payload: 40lbs (18kg)
- Internal Volume: 1450in3 (24L)
MAXIMIZED TOOL STORAGE CAPACITY:
- 2 Interior, Removable Pocket Panel Sleeves, Totaling 18 Pockets
- 32 Exterior Vertical Tool Pockets
- Waterproof polypropylene plastic base for moisture and abrasion protection
- Shoulder strap
- 8" electrical tape strap
- Stainless Steel Tape Measure Clip
RUGGED MATERIALS & CONSTRUCTION
- Polyester Canvas Body Fabric
- Leather Grips and Trim
OTHER FEATURES:
- Warranty: 5 Years (see Veto warranty terms and conditions)
TECH-TT PRODUCT SHEET
Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!Video & Product Sell Sheet
Customers Who Bought This Also Bought This
3 reviews for TECH-TT
You must be logged in to post a review.
benr0730 (verified owner) –
Very well made, I have had it for about a month and it is performing at the high standard that I was expecting!
Charles Martin (verified owner) –
I’m a signal maintainer for the railroad and bought this bag mainly to carry a Simpson 260, fluke 789 and hand tools. It has not disappointed I use this bag for daily inspections and trouble calls. Even with the bag fully loaded carrying it with the shoulder strap distributes the weight perfectly. The bag is 100% over engineered and I am very satisfied with the Tech-TT.
Camctomas@gmail.com (verified owner) –
Awesome bag. The dimensions are good because it fits a standard wheeled tool cart at one end of it.
Keeps all my tools nice and tidy and easy identifiable because they are stood up. I bought this bag out of the rest because the size, keeps all my tools in one bag, yes its filled to the brim and heavy but thats why its on a cart. I really love the tool storage on the outside of the bag, majority of other product dont have outside tool storage i like how this one utilized the exterior real estate. Should last me a long time made with quality materials and rivets at key points not just stitching. Quality goods come with a price and this bag was well worth it.