Find A Dealer
Click here to customize your TECH MCT BLACKOUT before you buy.

TECH-MCT BLACKOUT

Rated 4.83 out of 5 based on 6 customer ratings
(6 customer reviews)

From $219.99

The TECH MCT BLACKOUT Tool Bag comes with Veto Pro Pac’s NEW V-Swap™ REMOVABLE AND EXCHANGEABLE Tool and Meter Panels. V-Swap™ Laptop/Tablet and Bulk Storage Panels SOLD SEPARATELY (V-Swap™ Tool Panels | Veto Pro Pac: Tool Bags That Work)

TECH-MCT BLACKOUT
Tech-MCT Camo MO Tool Bag
Tech-MCT Compact/Tall Tool Bag
TECH-MCT HI-VIZ ORANGE
TECH-MCT HI-VIZ YELLOW
- +
Add to Compare

Description

The TECH MCT BLACKOUT is a stealth version of the popular TECH MCT featuring Veto Pro Pac’s proprietary V-SWAP™ system. Alternative tablet and bulk storage panels are available separately and can be swapped-out enabling tool, gear or job specific storage solutions. The Blackout version also has vinyl coated mesh and regular pocket storage on both flap openings. (Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately)

 

 

Specification

PRODUCT SPECIFICATIONS:

  • Height (H) : 14” (35.5cm)
  • Width (W): 12" (30.5cm)
  • Depth: 8.5" (21.5cm)
  • Handle Height (HH): 17" (43cm)
  • Weight (empty):  7lbs (3kg)
  • Internal Volume: 800in3 (13L)
  • Max Payload: 35lbs (16kg)

MAXIMIZED TOOL STORAGE CAPACITY:

  • V-SWAP™ removable tool pocket panel system
  • Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately
  • 44 Interior & exterior pockets of varying sizes
  • Electric Tape Strap
  • Neoprene Pockets for Meters/Testers
  • Holds over 50 hand tools
  • Waterproof base, 3mm polypropylene
  • Extra wide padded shoulder strap
  • Articulating/fold-flat handle with over-molded ergonomic grip

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

TECH MCT BLACKOUT PRODUCT SHEET

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

Reviews (6)

6 reviews for TECH-MCT BLACKOUT

  1. Rated 5 out of 5

    Pocket Handyman

    One of many Veto bags I use (TP-XXL, TP5B, MB3, TP-LC, Tech-XL), the Tech-MCT is the *perfect size* for daily use in my handyman business. Since I have to carry a variety of tools across multiple categories (repairs, carpentry, plumbing, electrical, installation, etc.) the Tech-MCT lets me segregate what I need via multiple pockets and zippers. I love begin able to find what I need quickly and efficiently without rummaging through the bottom of the bag. The only thing I’d wish was different: if the stainless-steel tape clips could be located more off-centre on the outside panels. If they were located more forward or back on the side panel, they would not interfere with any of the other tools in the outside pockets. And a couple more D-rings would be good too, for attaching more bulky items that don’t fit inside the bag. I wish the retailers here in Canada carried a better selection of the optional V-SWAP panels too. But your bags are still the winner for 99% of my daily usage. (Now if you just made a nice cart or dolly too, I could carry them all into the job site!!)

  2. Rated 5 out of 5

    RodneyPope5656

    I purchased this bag and received it at the end of May so it has been hands down the best bag I have ever owned. I am a hvac service tech and finding the right bag that can carry everything you need but yet not be cluttered up where you can’t find your tools when you need to has always been a problem. Then you might find a bag that was somewhat organized but it was bulky and awkward to carry around or wouldn’t stand up on its own just one waste of money purchase after another until this bag. I love the shoulder strap I can’t hardly tell I’m carring the bag around it distributes the weight so evenly I also really like the fact I can buy different panels so depending on my needs at the time I know I’m covered. I can put the bag down in muddy water or a wet crawlspace with its water proof bottom I don’t have to worry about my tools getting ruined. If your thinking about buying this bag go ahead and get it you will not be disappointed.

  3. Rated 5 out of 5

    Brandon Talania (verified owner)

    This is my first bag from Veto! This bag is well built with lots of pockets and storage space. I took advantage of the 20th anniversary sale and will be using the TP-LC as my primary tool bag and using the TECH-MCT for my secondary specialty tools. As an industrial electrician, I look forward to putting these bags through its paces in the harsh environments I work in.

  4. Rated 5 out of 5

    EricT7780 (verified owner)

    1st of all thank you veto for thinking of the tradesmen, these bags are heavy duty and pure quality. I have an MB2 for a quick grab and go service diagnostic. And now I had to get the Tech MCT Black out. This bag is a GEM, I load it up for my inspections or Maintenance and for the service calls that require more then a meter my 8 in 1. The original Tech MCT is nice too but when you BLACK IT OUT, I mean PERFECTION, so sleek and tough looking. The inside of the bag is amazing with all the different pockets for all different tools, so Organized and Professional.

    Thank you VETO

  5. Rated 5 out of 5

    Brady Houghtaling (verified owner)

    This bag is phenomenal. I have several veto tool bags and this one is perfect for the loadout I have. Always top quality bags

  6. Rated 4 out of 5

    paul kim (verified owner)

    HVAC tech here

    Loving the bag this far. It’s great if you want a bag to bring for inspections or quick diagnostics. On one side I have loaded the fieldpiece wireless set( probes, psychrometers, and temp clamps) the other side I have my multitool screwdriver, monometer, amp meter, needlenose pliers, wire strippers. The front small pouch with Velcro is good for quick access to a folded foil tape.

    On the sides I have my box cutter, my 6in1 Klein driver attachment. The other side I have a thermostat screw driver, skinny box cutter, and a permanent sharpie.

    My only complaint is that I wish it was more comfortable to wear with a strap. I wish it came with the option at check out if I wanted the small strap or long strap. My best preferred option was if it was able to also be worn as a backpack for climbing up stairs and vertical ladders.

Add a review