Tech OT-MC Open Tool Bag

Tech OT-MC
Rated 5.00 out of 5 based on 6 customer ratings
(13 customer reviews)


The Tech OT-MC tool tote bag is an open-top tool storage optimizer. This compact, open-top tool bag contains an internal plastic box that includes a repositionable insert box to allow for customizing your tool storage needs. The TECH OT-MC also features multiple vertical tool pockets for quick and easy access.

- +
Add to Compare



The TECH OT-MC is a compact open-top tool bag with an internal plastic box, housing a repositionable insert box that allows you to customize your tool storage
space options. The TECH OT-MC tool tote also features multiple vertical tool pockets for quick & easy access.




  • Bag Height (BH): 12”
  • Handle Height (HH): 19"
  • Width (W): 13”
  • Depth (D): 10.5”
  • (30cm BH x 33cm W x 27cm D)
  • (48cm HH x 40cm W x 30cm D)
  • Weight (empty): 5.75 lbs /2.5kg
  • Internal Volume: 640in3 / 10.5L
  • Max Payload: 30lbs/ 14kg


  • 28 Interior & Exterior Pockets
  • Outside Mounted Stainless Steel Tape Clip
  • Interior Injection Molded Plastic Box with Smaller Repositionable "Insert" Box with Lid
  • Waterproof 3mm Polypropylene Base
  • Over-molded Ergonomic Grip
  • Shoulder Strap


  • Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight 5 lbs
Dimensions 10 × 8 × 11.5 in


Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of Tech OT-MC


Reviews (13)

13 reviews for Tech OT-MC Open Tool Bag

  1. Rated 5 out of 5

    Quality bit of kit! I should have bought one ages ago instead of the false economy of buying and replacing a much cheaper fatmax many times.

  2. Rated 5 out of 5

    Awesome tool bag for your everyday tools.
    Highly recommended for electricians.

  3. Rated 5 out of 5

    Kafelect (verified owner)

    This is my 2nd Veto Pro tool pouch that I have bought recently. I will be buying another one soon. The Veto Pro products are easily the best I have ever owned. I’ve been an electrician for 40+ years now and when I switched to my Tech MCT, I actually improved my efficiency. My tools are very organized and quickly accessible. The purchase of the Tech OT is to replace an old open top bag that I use in an industrial setting. I chose it for its size and quality. These bags are among the best investments that I have made. Thanks to the Veto Company for making a HIGH quality product with the service industry in mind.

  4. Rated 5 out of 5

    Daniel Church

    Awesome tool bag! I’ve been using the OT-MC for the last 3 weeks – it’s large enough to store all my everyday tools and compact enough to carry easily. I work in a food processing plant so the removable plastic box in the centre is perfect for collecting off cuts if I have to strip or re-terminate cables in production areas. The layout makes it easy to grab tools quickly yet it’s deep enough to prevent anything from falling out. Quality is also second-to-none, highly recommended!

  5. Rated 5 out of 5


    I liked this bag so much I ordered another one. I can load this guy up & it’s not too heavy; it’s also small enough so it’s easy to maneuver inside a house without hitting the door jambs. Finally, all Veto products are built to last. Worth every penny.
    Tim Terlecky
    General Contractor, Inc.

  6. Rated 5 out of 5

    Jay Dunn

    This is the second Veto bag I have purchased and I am just as happy with this one. Deceptive how much you can fit inside. Very well constructed and well thought out. Some of the external pockets are a bit small for my range of tools but other than that very pleased again. Would recommend to all.


    This bag is perfect for the
    This bag is perfect for the limited number of tools needed for my HVAC troubleshooting needs. The storage containers were a a good surprise for holding the little items.

  8. DFlores

    sweet bag, i have 5 veto bags
    sweet bag, i have 5 veto bags before this bag, and this one is best by far. I am limited to tools, with equal weight . i tend to pyle tools in previous bags, but this one is perfect!
    Biltmore Mechanical Heating And Cooling

  9. Andrew Smith

    I’ve had the Tech MC bag for
    I’ve had the Tech MC bag for about 3-4 weeks and it’s perfect for HVAC/R service work. Room for everything you need but not big enough to become a catch all. This is my third Veto bag. I use the bigger bag (XL) for big jobs, and I also have a small bag I use for meters.

  10. David

    I LOVE this bag. It is well
    I LOVE this bag. It is well thought out and super sturdy. My only regret was not buying this sooner.

  11. Ed Ridgik

    I originally purchased this
    I originally purchased this bag as a partner for my drill bag. Upon receiving it, it made sense to use it to haul those tools that are always used every time I walk into a job. In, addition, I can carry my electric meters. Even better, I was able to lighten up my LC bags, and add even more diverse tools in the two LC bags that I carry in the cab of my truck. I was also able to shift some things around in the drill bag so that I could carry all of my bits and extra batteries. A true problem solver, lighter, smaller, and easier to navigate in older tighter job sites. Can’t go wrong with this handy little bag. So now, I can carry the little OT MC , my drill bag, and an LC into a job, and not have to make three trips to the truck.

  12. Caleb Smith

    Veto makes quality products
    Veto makes quality products that will last. I would highly recommend this bag to anyone that doesn’t want to carry every tool on the truck, but enough to get the job done!

  13. Joseph Castronovo Jr

    One of the best tool bags
    One of the best tool bags they have come out with yet. It holds all the tools you need for daily Jobs and has compartments for misc stock like wire nuts, connectors and lots more. It can hold up to 3 of them. I like having just one and then putting my fluke meter in the middle empty space, it is very protected in there. Over all the bag is very well constructed and gets my highest recommendation. You can’t go wrong with this bag!!

Add a review

You May Also Like...

Rated 5.00 out of 5

MB2 Tall Meter/Tool Pouch

Rated 4.79 out of 5

TP4B Tool Pouch

Rated 4.91 out of 5

Tech MC Compact Tool Bag

Tech MC