TP4B Tool Pouch

TP4B
Rated 4.83 out of 5 based on 12 customer ratings
(12 customer reviews)

$79.99

or 4 installments of $20.00 by Afterpay More info

The TP4 tool organizer has a hard bottom.

- +
Add to Compare

Description

 

The TP4B tool organizer is a “Next Generation” revised version of the TP4 with a Hard Bottom, extra tool pocket depth and riveted stainless steel tape measure clip. This service pouch stands up, bottom protected and ready to help carry and organize your most needed tools for any job or service call.

Specification

PRODUCT SPECIFICATIONS:

  • Width: 5.5”
  • Length: 8”
  • Height: 11.5"
  • Weight (empty): 2 lbs.

MAXIMIZED TOOL STORAGE CAPACITY:

  • Vertical Tool Pockets: 20 interior and exterior
  • Includes 2 Vertical Long Shank Side Tool Pockets
  • D-Rings: 2 small
  • 8" Electrical Tape Strap

RUGGED MATERIALS & CONSTRUCTION

  • Leather Trim Panels
  • D-Rings: Powder Coated Steel

OTHER FEATURES:

  • Detachable Rubber Handle
  • Metal Connection Clip
  • Warranty: 5 Years (see Veto warranty terms and conditions)

Download TP4B Product Sheet

Additional Information

Weight2 lbs
Dimensions8 × 5.5 × 11.5 in

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!


Download The Product Sheet of TP4B

Video

Reviews (12)

12 reviews for TP4B Tool Pouch

  1. Rated 5 out of 5

    Scott (verified owner)

    Great pouch holds a ton Well made excellent quality

  2. Rated 5 out of 5

    kurthawes93 (verified owner)

    This is a great bag. There is a few things that seem to be a little bit of an issue. 1. The description says it has room for a multimeter but I don’t know where it fits. Even the picture doesn’t show a meter in it. So I clipped it to the side. 2. The base should be a little bit bigger as it tips over quite often. 3. This pouch should have a shoulder strap as well as the handle. Still, this is a great bag. Great quality.

  3. Rated 5 out of 5

    josephfreer (verified owner)

    This is the pouch I have been waiting for!

    As a data tech, I was making good use of the TP3, but needed something just a bit bigger to bring in with me on jobs. I looked at the TP4, but was worried the pouch would tip loaded up. Then I found the TP-4B – the rigid bottom is perfect – easy to keep clean, stands upright with no issues and easy to keep with me at all times. This was worth every penny and I highly recommend it!

  4. Rated 5 out of 5

    Jay Dunn

    Having a smaller bag to grab with just the essential tools to perform smaller maintenance task is a godsend. The TP4B is a superb product and the build quality is amazing, I can see why they offer a 5 year warranty. It takes a while to find the perfect layout but once you have cracked it all tools are easily available. The labour also helps to make sure all tools are back onboard before leaving site. The price tag did make me doubt my choice but after using for a week I have no doubts and have since ordered more Veto products. My only modification would be to make the base slightly larger to avoid tip-overs.

  5. Rated 5 out of 5

    Trip68

    Another fine product from Veto!
    I already own the Veto Tec Pac Backpack, which is great for large jobs.
    But, sometimes when you get a service call, you know the big bag is overkill.

    This is where the TP4B comes in handy. This tool pouch will hold the basics.
    In my TP4B I carry:
    4 Husky Nut Drivers
    8″ Pliers
    Scissors
    7″ Pump Pliers
    7/16 Socket with 1/4 socket wrench
    11 in 1 screwdriver
    Vice Grip
    Putty Scraper
    Large Adjustable
    Small Adjustable
    Zip Tie
    Zip Tie Gun
    Mini Screwdriver
    4 Wrenches with ratcheting heads
    Brass Brush
    Stainless Brush
    Hot Stick
    Tread Tape
    Electric Tape
    Test Strip Rolls (x2)
    Drill Bits
    (carry drill on hip when needed)
    That is 20 tools with accessories !

    TP4B Bag stands upright (and dry) due to hard bottom.
    Easy to hang, just un-clip handle and re-clip around something close.
    Or, wear it cross draw (chewbacca style) and have all you tools at the ready.

    Wish it came with shoulder strap, but I took strap off inferior tool pouch and it works pretty good (just does not match)

    Veto – the best and last tool bag/pouch you will buy.
    Big box store brands do not even come close.
    It only costs a penny more to go first class!

  6. Rated 4 out of 5

    Benjaminlong7

    Awesome pouch. The cost is more upfront but not many bags have a 5 year warranty. I have my TP4B loaded to the brim and still have more room. Very durable construction. Would recommend to anyone in the trades. Only downfall is you have to buy a shoulder strap separate.

  7. Rated 4 out of 5

    crezzymann

    I’m an electrician, not an HVAC guy, but I still like this bag. Had the original TP4 for a while, used it for a while, and liked it. Like many others though, I got sick of having it fall over every time I set it down. I also tend to work outside quite a bit, and didn’t like having to set the bag down in snow or water without something protecting the bottom. Enter the TP4-B, which solves all of those problems.

    Only trouble is, when they made the TP4-B, they didn’t just add a plastic bottom to the existing bag. The main four tool loops in the back are all physically larger and deeper than on the original bag, the front covered pocket is now deeper and seems to be slightly wider as well, the side pockets towards the middle of the pouch are larger, and have extra pockets on the pockets compared to the original bag, and the area just behind the covered pocket is far, far deeper than on the original pouch.

    Now, none of those things are necessarily bad, they’re just different from how the original TP4 was built. The only thing that bothers me personally is the area just behind the covered front pocket being so deep. There’s actually a space under there, which runs under the other part of the pouch. I used to keep a reamer, small pipe cutter and outlet tester in that area, but with the new bag, those small tools will now disappear into the abyss under the rest of the pouch, and it becomes a massive PITA to get them out.

    If you’re switching from the TP4 to the TP4-B, expect to spend some time setting up the new bag. It’s not really the same as the old bag, and in my experience at least, nothing really fit properly in the new bag compared to the original, so I had to change my setup completely.

    While the original TP4 could be used on a standard tool belt, which I did for a while before turning it into a dedicated bag, the TP4-B seems to be designed primarily as a stand-alone tool carrier. It’s taller, wider and heavier than the original TP4, and seems to have more nuanced storage abilities than the original bag. The TP4-B is more the kind of bag you want to look at, and then select your tool, as compared to the original TP4, which if you used it long enough, you could just grab and go without looking.

    If you do need to carry small tools, like I do, consider jamming them into the belt loop. Since this bag is too big to be worn on a belt (in my opinion at least), the loop is really just extra storage. I managed to get my plug tester, reamer and pipe cutter all in there without too much trouble, and now I don’t have to try fishing them out of the bottom of the bag when I need them.

    All in all, this is still a really nice tool carrier, even if it is more “tote” than “pouch” now. Compared to my original TP4, I was able to fit 6 more screwdrivers, two more rolls of tape and a headlamp in this, without making everything super jammed together. Everything fits just snug, so when it falls over now, I’ll only lose a couple tools instead of all of them.

    Oh, and yes, there’s a spot for a tape measure now. If you have a full size tape though, don’t plan on using it – it makes the bag front heavy, and makes it want to fall over. With the tape on the front, even the slightest nudge will make it fall over, just like the original TP4.

    Now all they need to do is make the plastic base go all the way under the front covered pocket and they just might have a bag that legitimately doesn’t fall over….

  8. Rated 5 out of 5

    bntagg21 (verified owner)

    I use this bag for my daily service jobs. It carrys and is convenient enough to complete most repairs on roof top ac units.

  9. Rated 5 out of 5

    Jbunton

    Love this pouch. It holds everything I need to complete a solar install with ease. I love how it will stand up on its own, with the rugged bottom. You also have the option to hang it up, or clip it to a belt, or run a belt through the loop. It seems to be top quality, just like you would expect from Veto. I have had so many problems wearing out tool bags and pouches in under a year. I know that this pouch is going to last, and if I have an issue, I know Veto will handle it, with that unbelievable 5 year no down time warranty. I will always use Veto products as long as I’m in the trade. If you are looking for a dependable tool pouch that will hold your basics and then some, look no further. The TP4B is what you need!

  10. Rated 5 out of 5

    Macmarthaler

    Perfect pouch for for an electrician. Strong velcro cover, can fit screws, wire nuts, etc. Plenty of pockets, the plastic base prevents bag from tipping over.

  11. Rated 5 out of 5

    mago68@yahoo.com

    Best pouch for essentials. Easy to carry. Made with great materials.

  12. Rated 5 out of 5

    Brews_one

    I install and service laundry equipment for a living..Bought the tech ot-mc and this came with it..super happy it did because I now have the ultimate set up..The tech ot-mc is set up as my installation bag and this one set up for service..I uesd the belt clip on this one and the tape clip on the tech ot-mc to connect the two together..I like to my installation and service tools with me in the same bag..I never know if I’m doing service or an install or both so having my tools with me is a must..I was going threw bags like crazy do to the weight..now I have the option to take the bare necessities on a small service call while still keeping the rest of my tools at the ready..I’m really impressed with the quality of both bags..and believe they will stand up to what I throw at them

Add a review