Find A Dealer

MB BLACKOUT

$64.99

The MB Blackout is a clip-on meter bag designed to hold a small selection of tools and one or two meters. When not in use it can clip onto any model Veto bag’s tape clip or D-Rings.

MB BLACKOUT
MB HI-VIZ YELLOW
MB Small Meter Tool Pouch
MB HI-VIZ ORANGE
MB CAMO MO
- +
Add to Compare

Description

The MB BLACKOUT is a small-sized, zippered meter bag and is a stealth black version of the popular MB meter bag, with multiple pockets for your meters, analyzers and repair tools. This versatile yet compact bag has a rugged construction and can be carried, hung over a shoulder or clipped to a belt.

Specification

PRODUCT SPECIFICATIONS:

  • Height (H) : 10” (25.5cm)
  • Width (W): 8" (20cm)
  • Depth: 3.5" (9cm)
  • Weight (empty):  1.25 lbs/.5 kg
  • Internal Volume: 153in3/2.5L
  • Max Payload: 12lbs/ 5.5kg

MAXIMIZED TOOL STORAGE CAPACITY:

  • 10 interior and exterior tool pockets of various sizes
  • Tactical all-black construction
  • 2 meter pockets; holds meters up to 9.5” tall
  • 2 D rings; for clip on accessory options
  • Metal belt clip and belt slot
  • Detachable elastomeric handle & electrical tape strap

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

MB BLACKOUT PRODUCT SHEET

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video