Find A Dealer

TECH-MCT BLACKOUT BUILD-OUT

From $120.01

The TECH MCT BLACKOUT BUILD-OUT is a fully customizable Tool Bag. Customers MUST PURCHASE AT LEAST 2 V-Swap™ REMOVABLE AND EXCHANGEABLE PanelsV-Swap™ Panels include Tool, Meter, Laptop/Tablet and Bulk Storage Panels which are all SOLD SEPARATELY and can go on the front or back (V-Swap™ Tool Panels | Veto Pro Pac: Tool Bags That Work)

- +
Add to Compare

Description

The Tech MCT BLACKOUT BUILD-OUT is a stealth version of the popular TECH MCT featuring Veto Pro Pac’s proprietary V-SWAP™ system. Alternative tool pocket panels, all sold separately, can be added & swapped-out enabling tool, gear or job specific storage solutions. The Blackout Build-Out version also has vinyl coated mesh and regular pocket storage on both flap openings.

CHOOSE AT LEAST 2 PANELS

PURCHASE REQUIRES CHOOSING AT LEAST 2 PANELS; BAG WITHOUT PANELS IS NOT SOLD SEPARATELY

Specification

PRODUCT SPECIFICATIONS:

  • Bag Height (BH) : 14” (36cm)
  • Handle Height (HH): 17" (43cm)
  • Width (W): 12" (31cm)
  • Depth: 8.5" (22cm)
  • Weight (empty):  7.3 lbs/3.3 kg
  • Internal Volume: 800in3/13L
  • Max Payload: 35lbs/16kg

MAXIMIZED TOOL STORAGE CAPACITY:

  • V-SWAP™ removable tool pocket panel system (panels available & sold separately)
  • Tactical All-Black Construction
  • 44 Interior & exterior pockets of varying sizes
  • Neoprene Pockets for Meters/Testers
  • Holds Over 50 Hand Tools
  • Waterproof base, 3mm polypropylene base
  • Extra wide padded shoulder strap
  • Articulating/fold-flat handle with over-molded ergonomic grip
  • YKK® zippers
 

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

TECH MCT BLACKOUT BUILD-OUT PRODUCT SHEET

Additional Information

Weight 7.3 lbs
Dimensions 13 × 17 in

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TECH-MCT BLACKOUT BUILD-OUT”