The MB3 BLACKOUT is a “blacked-out” large compact sling-style meter bag that COMES WITH A REMOVABLE SLING-STRAP and removable carrying handle, so you can choose whether to use as a sling bag or carry it at your side. Capable of storing, transporting and protecting large meters. The main bay is designed for digital manifolds, meters up to 13.5” (34cm) tall and/or a few select hand tools. The back and inside pockets can store wireless probes. REMOVABLE BACKPACK STRAPS are SOLD SEPARATELY to convert the MB3 Blackout into a SMALL, COMPACT BACKPACK.

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

MB3 BLACKOUT PRODUCT SHEET