Tool bags
Tool Storage
Made in USA
Tool Bags By Trade
Everyday Carry
Find A Dealer
MB2 Tall Meter/Tool PouchVPP10021
MB2
MB2
$74.99
The MB2 tool bag is a taller version of our MB tool bag that holds taller meters, analyzers and repair tools.
MB2 Tall Meter/Tool Pouch
MB2 HI-VIZ YELLOW
MB2 HI-VIZ ORANGE
MB2 BLACKOUT
In stock
Description
Size Matters! The MB2 tool bag is a taller version of our MB-Meter Bag and accommodates and protects taller meters, analyzers and repair tools.
Features rugged construction, roomy pockets, interior cushioning, heavy duty zippers, and a detachable rubber handle. The MB2 offers tradesmen a meter bag or small tool bag. An optional shoulder strap is sold separately.
Specification
PRODUCT SPECIFICATIONS:
- Height: 13" (33cm)
- Width: 8” (20cm)
- Depth: 3.5” (9cm)
- Weight (empty): 2 lbs. (1kg)
- Max Payload: 15lbs (7kg)
- Internal Volume: 190in3 (3L)
MAXIMIZED TOOL STORAGE CAPACITY:
- Vertical Tool Pockets: 8 inside & 2 outside
- Meter Pockets: 2
- D-Rings: 4 small
RUGGED MATERIALS & CONSTRUCTION:
- Durable Leather Trim Panels
- Metal Connection Clip
- 600 PVC Impregnated Denier Nylon Body
- 1200 PVC Impregnated Denier Nylon Tool Pockets
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers
- D-Rings: Powder Coated Steel
- Stitching: Industrial Strength Double Nylon Stitching
OTHER FEATURES:
- Warranty: 5 Years (see Veto warranty terms and conditions)
Additional Information
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Video & Product Sell Sheet
Customers Who Bought This Also Bought This
66 reviews for MB2 Tall Meter/Tool Pouch
You must be logged in to post a review.
banningguitars –
The MB2 is a great bag. I am an electrician at a food manufacturing plant and I use this bag as a troubleshooting bag. I cary my meter, multiple screwdrivers, wire strippers, wire cutters, a few wrenches. Ive used my bag for 3 years so far and it has held up pretty well over all. Some Cons: The handle it comes with the spring clips wore out quickly and don’t stay on anymore. I used a shoulder strap I bought from Lowes to cary the bag (I wish it came with one). When I first got it I put an 8 in one screw driver in the side pocket and it wore through the bottom pretty quickly.
Overall Its a great bag and I would recommend it.
isaac19delta (verified owner) –
Bag has been quite the edition to my Veto collection. Also own the HVAC Tech Pro backpack. This bag serves as a go to for diagnosis and common repair items. I would give it 4.5 stars, but that isn’t an option. Only thing I would change is adding a shoulder strap (got one now) and making the lower small pocket just a hair deeper or more flexible material as well as making the side pockets more flexible. But then again, when I get a bag/pack, I tend to want to over stuff it beyond design intentions. Love the Veto packs!
Joseph Knott (verified owner) –
Excellent bag, I do wish it had been slightly larger but not as big as the next up bag, MB3 I believe our maybe I just have too much stuff, Lol. This is my go to bag for diagnostic work when first on a job, I love it!
Zane Pulido (verified owner) –
I highly recommend this bag for any one in the trades It’s the perfect bag. I’m an electrical commissioning tech and this bag serves it purpose and then some. hands down best bag I’ve owned.
KevinS –
Th Absolute Bet Bag for Me as and E & I Tech. It allows me to carry a meter and all of the essential hand tools that I need to to my job without having to carry my other Bags of tools. Like My MCT Blackout or My Tech Pac Pro Backpack. which by the way are my best go to bags when the ***t hits the fan and it is all hands. please keep up the great work and these are the best bags for the value and life if a product to get. Big Fan
Kodykc94 –
Best bag for troubleshooting hands down! I’ve had many different bags and this one was the best by far. I can also do lots of repairs with just this bag. I even purchased back pack straps so it’s easy to carry with me when climbing roofs. Definitely worth the money!
joshg13 –
Great bag! I can diagnose and repair 90% of my calls with what fits in here. Simple and straightforward design while tough enough to handle everyday use. Obtained a warranty replacement after some zipper trouble and it was worth every penny. I plan to buy another larger bag next to carry a tablet and more diagnostic tools.
russelldyck@yahoo.com –
I love it! I purchased this mainly for roof top hvac maintenance and troubleshooting. Holds my meter and basic hand tools well, no more stuffing my pockets or having to drag my main tool bag up a ladder for simple tasks.
Add a shoulder strap and it becomes even better!
ptkoenig2000@hotmail.com –
I am in the test and balance business ,and I got the MB2 to replace my tool back pack ,and tool pouch.This bag holds all my test meters and tools i need to do my job.
Sebastian Asturrizaga –
I have been using mine to carry a minimal tool setup around the job site. It’s feels robust and everything is neatly packed in. The many pockets and slots are great for organizing and it’s such a small package.
William Morton (verified owner) –
I love this MB2, big enough for all of my meters and accessories. Definitely worth the money the quality is top notch. I clip it onto my tech pac bag or just grab it and go. Can’t say enough about the quality of the Veto products. The price you pay is nothing when you can tell how long they will last!
EdTheTexan (verified owner) –
I’m a mobile auto mechanic and I use the MB2 to carry my power probe 4. It fits so nicely like it was made for it. Thanks!
Gaz –
Fantastic bag and very deceiving as to much you can actually fit in them ,I’ve packet mine out with the essentials and it’s made life a great deal better.
Zeke25 (verified owner) –
This is my third Veto bag and I used it mainly to carry my fieldpiece wireless job link probe setup and hand tools. It’s for smaller jobs/pms and it definitely serves its purpose. I’m happy with my purchase and definitely look forward to adding more bags to my arsenal LOL!
Tamara Thayer (verified owner) –
Bought this for my husband, who is currently in school for HVAC, for Christmas. He LOVED it! Fit all of his tools in it for a “to go bag”. Gonna have to order him the backpack next for his bigger tools…
Derek Karnes (verified owner) –
I am a Hvac technician and was recently diagnosed with rheumatoid arthritis. I have been carrying Veto bags for years. My service bag was a Tech-MC and finally pulled the trigger on a backpack but unfortunately was unable to use it do to my health issues. My tool bags have become difficult to lug around so I decided to give the MB2 a try. This bag has physically helped me so much. I put my Tech MC strap on it and has cut down my weight considerably. In this field we seem to fall apart and this bag is easier on the body. If your dealing with joint issues this is a solid solution for transporting your tools.
ChrishernandezMb2 (verified owner) –
Great meter bag,
Big zipper components:
Fits all my probes (Fieldpiece JL3KH6) + Fieldpiece SC640, Appion core removers, multimeter thermocouples, leads, clips and extra batteries.
Sides:
holsters my Milwaukee M12 surge 1/4 impact, 2 flashlights, opposite holter holds my 11-in-1, markers and couple of Malco interchangeable 6″bits, and 6″extention.
Tall Velcro flap: Klein wide mouth adjustable 8″ wrench, Klein 6″ slim jaw adjustable, Klein 2005n crimp/wire cutter, Knipex 8″ cobra, inspection mirror and zip ties.
Small Velcro flap: impact bits, klein 5-in-1stubby, Klein pocket protector thermostat screwdriver.
D-Ring holds magnetic tape measure and clip on car keys.
Very well built, takes a tough job easily
David Roy –
I started using my MB2 for a Panduit wire labeler and cartridges, wire markers etc. I have since found this bag to be more useful than I originally thought. I have used it also as a small 12v drill and impact storage and carry bag to the job sites and it fits all my bits and accessories perfectly. The batteries even fit in the side pockets. Great little bag and just as rugged as all the Veto bags. This is my 4th Veto Pro bag and I may have to continue getting others as I find good uses for them.
Hilth –
I‘ve used this bag as my everyday bag for a few weeks and I have been very impressed with the quality of this bag and how much you can actually fit in there! I will be a Veto customer for life after this bag and I think it’s the perfect diagnostic bag for any tech.
Gfranklin1001 –
Perfect size. Carries my job links set and field piece meter. Plenty of room for more. Highly recommend this bag.
RonRose –
This thing is TOUGH and can hold much more than you’d think! Zipper is having issues after a couple years of daily use but all in all, this bag is an absolute BEAST
Rtechlord@gmail.com –
To get a 5 star review from me is nearly impossible so let’s just say 4 is really really amazing, just not perfect. Great bag outstanding product. If this bag lasts you 5 years and not 10 or 20 years you are seriously misusing it. I have been in multiple fields and industries over 20 years and having the right gear is what makes a real tech versus a 9-5’er. For all you techs out their crushing it this is the bag for you. Everything is perfect, the pockets, the spacing, everything.. Well almost everything but not enough to not get this bag. Handle at the top and D rings are awesome quality and we’ll thought out. HVAC, IT GUYS, ELECTRICIANS, CONTRACTORS, PLUMBERS, etc.. Anyone can find this bag useful I promise. Call me up if you don’t I’ll buy it off you.
As glennhvacman – March 9, 2016 said, the clip location needs a re-work. Think of your layout like a space shuttle, it’s all one big piece and then separates into two or more when it reaches a certain distance. You have your main bag for everything you COULD possibly need, this should be able to attach for the trip to the site and detach when you arrive at the site for everything you SHOULD need. Perhaps there is another main bag it was meant for? Even when you don’t overload it space wise, good tools are heavy and the clip does not work well even on a conceal carry belt. Shoulder strap is a must. I feel the mb2 shortie will not have as much of a problem however I am not in the testing program yet unfortunately so I can’t tell for sure.
I intend to purchase the TECH PAC LT (THE 15″ LAPTOP VERSION) and deal with the clip problem as it comes. The D rings can solve the problem for you if you get creative, afterall you should be a tech haha.
Vmunoz –
Great bag. Is exactly what I was looking for in function, durability, style and warranty.
Fits my Fieldpiece SC77 with enough room for extras like my gloves, headlamp, wiring nuts and stubby 1/4-5/16 driver. The internal pouch adds storage for my RTC2 probe tip set, zip ties and others. Outside pouches store various tools I need to diagnose and make electrical repairs without lugging my large mouth tote. It’s a solid bad that not only looks professional – it is.
honfor450 –
Seems to be a great bad, not had it that long or had a chance to put it through its paces. Will hold more tools than you think and really nice option to trying to dray a full size tool bag around. Buy it.
Text A Tech –
Awesome little bag that holds
Awesome little bag that holds all that you will need to troubleshoot a HVAC system. Made very well and heavy duty clips/zippers
SergioD –
This product is high quality
This product is high quality but here you can find it for lower price: amzn.to/2oRtYcE
TechnicTim –
My mb2 has exceeded my
My mb2 has exceeded my expectations. I am very impressed how the mb2 holds exactly what I need for hvac service calls and holds so much more if I need it to. I have room for my Ridgid 12v impact driver and all the hand tools I need for my service calls packed nice in this bag. The quality and ruggedness of this bag is outstanding. I can feel the heavy duty quality every time I open and close this bag. I love my MB2
Alex –
I’ve been using the MB2 for a
I’ve been using the MB2 for a troubleshooting bag, for about a month now. Love the size of the bag for what I use it for. Not sure if it’s the way I have it loaded, but I am having trouble getting it to stand up, and not fall over. I wish it had a hard bottom like the TEC MCT, I have for my main bag. But again I am satisfied with my purchase.
Elliott –
Picked up the MB2 for a
Picked up the MB2 for a troubleshooting bag to compliment the Tec MCT. It works great for this with the exception of not standing up, and falling over a lot. I think a good improvement would be to add a solid bottom like on the Tec MCT. Also as listed in another review, the clip should be lowered on the back where it could clip on the tape clip on the Tec MCT. Or raise the tape clip on the Tec MCT. It is a well built bag. Would highly recommend this product.
Rick –
Goes great with my veto camo
Goes great with my veto camo backpack.I am an electrician, its good for every day tools like dikes,linesman,multitool screwdriver, and other essentials without opening the backpack.
Michael –
Great bag for on the go
Great bag for on the go troubleshooting and smaller jobs. The taller size will accommodate taller meters and hand tools. My only complaint/suggestions would be make the inside a lighter color for greater visibility while searching for a tool in low light & include a shoulder strap. Ive since added a strap to mine but feel it should be included. Otherwise great product.
James –
Great bag for HVAC. Fits my
Great bag for HVAC. Fits my meter and all tools I need to complete jobs. Recommend to any service tech.
James –
Great tool pouch. Holds meter
Great tool pouch. Holds meter well and plenty of tools. Recommend to anybody.
Aaron –
As an elevator mechanic,
As an elevator mechanic, stairs are a big part of the job. I also have the TechPac Backpack and its awesome but can get heavy after a few flights. The MB2 is perfect, it holds my fluke, my service tool, and a few hand tools. Its just big enough to hold the essentials without getting too heavy. I do wish it had small slots for screwdrivers on the outside and in the larger velcro pocket though.
R. Lewis Electrical Services –
Great add on bag…I use it
Great add on bag…I use it to carry my large Brady Labeller, wire terminations tyraps 11in1, strippers, clamp meter, wire numbers book ,pen pencil and sharpie,and colored tape…Use this as a job specific bag for control panel and distribution panel terminations. Absolutely love it and see me purchasing a couple more for same scenarios …Next up one for data terminations.
Tom –
Purchased to lighten up my
Purchased to lighten up my current bag I use everyday. I put only the tools I use everyday which includes my Fluke multi-meter, Fluke amp-meter, and various hand tools light nut drivers, screwdrivers, wire cutter and stripper. As well as a stubby screwdriver and precision set. Everything fits nice and tight yet easy to remove and place back in. I work as an HVAC tech and only wished I purchased this bag sooner.
JaredP –
I have had this bag for a
I have had this bag for a couple of weeks now and it is great! Very sturdy and is made very well! I will be biying another veto bag in the future. Its worth the money for sure.
Rknox –
Bought this mb2 for service
Bought this mb2 for service calls and maintenance mainly as my (hate to say it but…) my old Klein tool backpack gets pretty soggy and annoying to lug for a simple call or maintenance. This bag has been great, I’ve been using it for about a month or so now and my back feels amazing as well. Highly recommend it and the shoulder strap as well!
Robert Marks –
great bag I put my meter in
great bag I put my meter in one pocket and hot gloves in another making it easy to carry to problem
tmacklin –
Solid bag, sturdy, well made.
Solid bag, sturdy, well made. Plenty of room for my hand meters (multi, clip-on, ncvt, laser distance meter) and leads plus a couple of knick-knacks.
One minor complaint – The clip is just slightly too high to attach effectively to my Tech-XL, even on a flat surface it sits up and comes off with even a slight bump.
Andrew –
Fits meters easy, a lot more
Fits meters easy, a lot more space than the MB bag, so easy to leave in the van and then just clip it to the backpack when you need it.
Very robust
Kevin Hanna –
Great product, like every
Great product, like every Veto product ive bought its built to last..easily stores meter, with room to spare for other essential tools…no regrets on any Veto products, worth every penny..thanjs
Lonnie –
This is a very well built bag
This is a very well built bag. My only complaint is that I wish the side pouches were a little bit wider. I own 3 different Veto bags and love all 3. Zero Down Time in the 3 years I have been using them!
Chris Wanamaker –
I ordered this bag to cut
I ordered this bag to cut down on carrying weight when doing service calls and annual maintenance work, it holds everything i need. I would reccomend this product to everyone that can give up not carrying around a 50lb toolbag with every tool they own in it
James –
Got a Tech LC a few years ago
Got a Tech LC a few years ago, does a great job all around. Bought the MB2 after working with a local HVAC contractor doing service calls at our plant. I had some odd ball rifle sling bits lying around and made an adjustable bungie strap for it, works out great. Good products, keep it up.
MAC –
It’s a great bag! I have had
It’s a great bag! I have had this bag for a month now and it’s working out great. I have a Tech-MC for static Apt. Turns and heavy duty maintenance. The MB-2 is my grab and go, assess, and fix the problem bag. Just the basic tools and a low cost measuring tape will go on the outside D ring. I really bought this bag for the iPad mini with an Otter box hard cover that was issued to us. It fits! Also get the shoulder strap and use it with the handle. LC, MC, Tech-MC, and MB-2 , all great bags. Very sturdy and well made. Thanks Veto Pro Pac!
Tom –
This bag is great for task
This bag is great for task specific tools. Best part is my coworkers are jealous as hell.
Huan Ewan Tran – Berwick Australia –
A very high quality bag for
A very high quality bag for smaller job – either at a job site or around the house, at ground level or on the roof.
The bag is tall enough for the meters and hand tools – even a 1/4″ socket set and the some of the 3/8″ bits can fit in as well.
The rear clip is handy for attaching to the belt. The sturdy handle clip on handle is a gem.
I really love the loop strap for the various tapes – either plumber, gas or duct tapes.
A great second bag!
James renfrow –
I bought your bag don’t want
I bought your bag don’t want a bumper sticker for free advertising just want to work without being bother to do this or that cause I bought your bag not worth the price if I have to get bombarded with emails wanting my attention all the time just leave me alone or give me free stuff about return the fucking bag
Thanks , James
John –
Great item, same high quality
Great item, same high quality bag as all the rest, Second Veto bag i own and more still to buy
Dale. C, Louisiana –
I recently started doing
I recently started doing service work and figured I needed a smaller bag to accommodate my Tech Pac and the MB2 is perfect! I love this little bag, I can rearrange my tools to do service calls or to do basic installs. My biggest regret is not buying one sooner!
William –
I love the bag. I work on
I love the bag. I work on commercial HVAC equipment, I use it for taking the basic tools, meter on the roof to trouble shoot. I am surprised how many tools it holds. I have almost all the basics in it to trouble shoot.
Couple things I wish were different –
1. Wish it had a shoulder strap, (i use one from a old bag)
2. The front flap material ripped on me, wish it was a different material, more durable.
3. Wish the front “smaller pocket” was about a 1/2 deeper, to hold some small wrenches I carry.
maztek –
Coming up on one year with
Coming up on one year with this bag. Bought it primarily to house my Fluke T5 along with a few hand tools and stuff. Well, I’m up to 11 pounds and I carry it everywhere without fear of dropping stuff out. Used the OEM Fluke bag until it fell apart but it had been too small anyway. I clamber around on catwalks, ladders, and conveyor belts and needed a zippered case that takes abuse. The hand strap is ok for hanging it when working, but I rigged up a shoulder strap using tubular webbing, shock cord, a pad, and riv nuts with clips. Keeps the bag snug in my armpit and doesn’t hang loose like a normal strap. Last month, a piece of fabric started tearing apart inside the case (no big deal)and I contacted Veto for the Zero Down Time Warranty. Ben Daily worked with me and I ended up with a new bag! No hassles and quick service. Best $65 I ever spent!
Good: The bottom is rubberized canvas. Carrying handle is comfortable.
Improvements: The bottom of side pockets could be better reinforced. I jammed vinyl gloves down them so pliers stop wearing thru. The main flap could have a credit card pocket sewn on the outside, maybe see-thru plastic?
JR –
I climb up and down on and
I climb up and down on and off of over head cranes every day. Would be nice if it had a shoulder strap to free up both hands for climbing. Feel a little safer with both hands not trying to carry anything. For now I clip it on my belt, works okay.This bag has all the tools I need to carry for a quick inspection or minor repair.
Tom.E. –
Got this bag a few days ago
Got this bag a few days ago and set it up today. It’s an ok bag but use a couple improvements.Would have been a lot better if there had been another pocket or elastic loops to put wrench or screwdrivers.I do think the price is a bit high but I’m hoping it will hold up…..time will tell.
JLT –
I originally was carrying my
I originally was carrying my main tool bag that weighs a ton to most of the jobs. So I searched around for a small bag to carry and found the veto mb2. This bag is perfect for a quick to go bag when a big tool bag is not needed. This is my first veto tool bag and I’m really looking forward on purchasing the tech pack to replace my main tool bag.
Bran –
I’m a hvac technician with a
I’m a hvac technician with a lot of tools. Needed a small bag for small repairs and pm’s. This little monster really comes in handy for situations like those. Not to be stuffed full of tools just something with your go to tools to get you by. I love it.
gene –
This is a great bag. I got
This is a great bag. I got this bag so I could store my meterand accessories together without brealing.
glennhvacman –
I’m an HVAC Technician, and
I’m an HVAC Technician, and this is the 5th different bag I’ve bought from VETO.
I bought this bag as an add on to my Tech Pack, for when I only need some basic tools. I had the MB a few years ago, and the larger size of the MB2 is just what I needed. Plenty of room for some basic hand tools and meters.
Only 2 things I didn’t like is:
1. It doesn’t come with a shoulder strap, which I had to buy separately, and I had to search for a vendor that sells one as VETO wouldn’t sell it on their website. I do a lot of walking and climbing up ladders, so a shoulder strap is essential
2. The clip on the back is too low. When I clip the MB2 on the tape measure clip, the bag hangs too low and gets knocked off the tape measure clip very easily. I had to clip the MB2 on a small D ring on the Tech Pack, and now the MB2 swings around a lot.
kawnee –
When I received it, I was
When I received it, I was surprised by the size, after a few weeks, I fine how to use it. I put all my extra battery for my drill, with the power supply. Now I have all my equipment on a field. Great strong product. Merci Veto, pour rendre visible à l’achat un tel produit.(French man from French Guiana).
Trizton –
I recently purchased this for
I recently purchased this for my new job as Electrician/Instrumentation Tech.The boss seen it and wants to order for our company.Looks like we will be using to house our HART 475 field communicators as well as our meggers.Great product.
Stan the man –
The MB2 is a Great Meter bag
The MB2 is a Great Meter bag it holds my Fluke 233 and my Fluke 381 at time as well as lots of meter leads, adaptors and batteries a very great asset to my other Veto pro pac bags
Stanley
Stan the man –
I got my Fluke 233 and Fluke
I got my Fluke 233 and Fluke 381 remote display meters in it with room for many leads and adaptors as well as a few tools
Nut Driver –
I already own a Tech LC, it
I already own a Tech LC, it is pretty sweet, but gets heavy for maintenance and diagnosing calls. The MB2 holds my regular clamp meter, my dual temperature meter, my temperature clamp, a service gage and small hose, wire strippers, small pliers, 1/4&5/16″ nut drivers both11″ and stubby versions, two rolls of electrical tape, and a roll of Teflon tape. I occasionally cram more into it, but for AC services, its perfect.then if the tools at hand aren’t enough, it clips quickly onto my Tech LC, and I’m ready to rock. It would get 5 stars, except it’s not made in the USA. For $65 it could be.
Wence –
This Veto pouch MB2, is of
This Veto pouch MB2, is of great comfort and has enough space to carry all the necessary tools for troubleshooting any air conditioning and refrigeration system, whether residential or commercial, its construction is of extremely high quality and it seems that will be lasting much of the 5 years that Veto offers warranty, I am extremely satisfied non only with this pouch, but also with the high customer service that is offered along with it.
BUKO –
I just got my bag n i can’t
I just got my bag n i can’t believe every tool that I need to complete my job fits in such a small bag it is very comfortable and reliable.