Tool bags
Tool Storage
Made in USA
Tool Bags By Trade
Everyday Carry
Find A Dealer
LC Small Compact Tool BagVPP10018
LC
LC
$204.99
The LC tool bag caters to the more job-specific crowd. With 60 pockets capable of handling 75 hand tools.
In stock
Description
Where the XL is more of a generalist bag, the LC tool bag caters to the more job-specific crowd.
Don’t misunderstand, it still offers transport-plane-like storage with 60 pockets capable of handling 75 hand tools. If you’re any kind of tradesman, you’re going to love the bag’s layout. It’s perfect for all sorts of hand tools and can accommodate meters and butt-sets.
Specification
PRODUCT SPECIFICATIONS:
- Height: 13.5" (34cm)
- Width: 14” (35.5cm)
- Depth: 9.5” (24cm)
- Handle Height: 19” (48cm)
- Weight (empty): 8lbs (3.75kg)
- Max Payload: 35lbs (16kg)
- Internal Volume: 1080in3 (18L)
MAXIMIZED TOOL STORAGE CAPACITY:
- Vertical Tool Pockets: 48 inside & 6 outside
- Flat Zippered Pockets: 2 inside & 4 outside
- D-Rings: 4 large and 5 small
- Exterior Electrical Tape Loop: 8” Fabric with Clip Closure
- Stainless Steel Tape Clip
RUGGED MATERIALS & CONSTRUCTION:
- Waterproof Base: 3mm Injection Molded Polypropylene
- Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
- Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 6 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 38 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
OTHER FEATURES:
- Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap
- Warranty: 5 Years (see Veto warranty terms and conditions)
Additional Information
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!Video & Product Sell Sheet
Customers Who Bought This Also Bought This
Out of Stock
37 reviews for LC Small Compact Tool Bag
You must be logged in to post a review.
cahoon.derek –
Have been using this bag for a couple of months now and love it. I am a electrician and can easily carry all of the tools I need in a compact fashion. My coworker has the same bag and has problems with the zippers and suggested that I snap the sides down and only close it for weather. Awesome bag would strongly suggest.
Peter Jones –
Have used my LC tool bag for over three years. I can put it down in the water, the zippers keep dust and drilling debris out. it is heavy enough to hold a door open against the door closer.
I have used several bags in the past, but the LC is the best by far. Recommend A+++++++.
Peter Jones, Locksmith
Ralph_Ruiz –
Bought the LC as my first Veto bag I’m currently enrolled in HVACR school and have been slowly buying my tools as I move along my school. I love this bag it’s well made and I’ve fit it with almost all my starting tools I’ll need amd I still have room. All I can say is Veto you’ve made me a fan of your bags. Because I also just recently purchased an MB2 for my manifold gauge and hoses. I definitely recommend the LC bag.
Jasonbuckner1011@gmail.com –
Great bag! I love how organized I’m able to keep my bag. I keep tools for install and service for HVAC in Arizona so my bag stays full but this bag is legit and keeps all my shit together. By far the best bag I’ve ever had.
bconley606 –
This is my 3rd bag in the past couple months and I absolutely love these bags. I got this bag over the tech lc because the backside not having many pockets for other things besides meters. I very well might regret that later as i’m only an hvac trade school student at the moment but anyways these bags are of amazing quality and im sure i will be buying more. i highly reccomend vetopropac bags to anyone that takes pride in their tools and work.
Bob T –
I have been an electrician for 36 years and have been through all kinds of bags. You name it and I’ve probably tried it. Bags have ripped, gotten holes in them, handles torn off and of course my personal favorite – a D-ring for my shoulder strap broke while I was carrying my bag, dumping my tools everywhere. Finally, a tool bag I can rely on. I purchased the LC because of its versatility, quality and size (not too big). I carry the hand tools I need on one side and test meters, leads, flashlight and a 12V driver on the other. The versatility comes in that I can replace the meters with more hand tools if needed depending on the type of job I’m on. I also like that it’s a closed bag. Most recently I’ve had open bags because of the upright organization, but it would always be susceptible to bad weather and prying eyes. I could never find a closed bag that could organize and give quick access to my tools the way the LC does. It’s worth the price. I only wish I had found out about VETO Pro Pac sooner. I’m very happy with my purchase. Every time I grab that handle I know this bag isn’t breaking. It organizes, protects and gives easy access to my tools and it’s built to last. That’s about all you can ask of a tool bag. Oh yeah, and don’t forget, it comes with a 5 year warranty. Thanks VETO!
Pat Gallagher –
I have been a carpenter for 40 years and I have had numerous tool bags, tool boxes and tool totes and they all pale into comparison with the veto pro pac LC . Vertical tool storage and general layout of these bags takes away the frustration and wasted time spent searching for that tool that you just can’t find. Build quality is superb and it looks good too, I like it so much I have the OT-LC on order and I have the cp4 grubber
Recchi83 –
I’m a new construction plumber and I love how this bag keeps my tools organized. I like that it has two sides, I keep my common tools on one side and on the other the ones I don’t use as often. With my old bag things bounced around and tools would break. But this is very secure and keeps my tools locked in and safe. Totally worth it
plumber94 (verified owner) –
Great bag holds a ton good quality. I am a service plumber and this bag holds what I need for most jobs
jwd72001@gmail.com –
Great bag. im in the hvac field and this bag holds all the tools i need it to. I use this one for heating and the backpack on for ac. Would not get any other bag again, very well made bags.
socal_expat –
Great bag! My only regret is
Great bag! My only regret is waiting so long to pick one up. You really need to handle a Veto bag to fully appreciate just how robust they are. Really like this size of bag it holds plenty of hand tools. i’m now anxiously awaiting delivery of my next , but probably not my last Veto bag.
David Lodigiani –
I’m a Mechanical Engineer and
I’m a Mechanical Engineer and a life-long Mr. fixit. Pluming, electrical and light carpentry are always on my to do lists. I’ve assembled a workbench full of tools but I like to have a bag of my favorites to take to whatever job I’m working on in my house or more recently my children’s houses. I have been looking for the last few months to replace my last toolbag that was wearing out. When I saw the LC bag I couldn’t believe the quality or cleverness of the design. It was so well made it made me feel that someone had snuck in and designed my dream bag.
Bryan Albertini –
This bag is so we’ll made I
This bag is so we’ll made I really wish I would have known about it a few years ago. It would have saved me cash from not buying 5 other bags in that time frame. I highly recommend it. I just really wish veto would advertise with local trade unions. I am in the I’ve.
Doug S –
Great tool bags. I am an
Great tool bags. I am an Electrician performing commercial, residential, and maintenance work. I can fit all of my everyday tools in my LC bag. These bags are the toughest, longest lasting I have ever had.
John C –
I’ve only had the bags for a
I’ve only had the bags for a couple jobs but so far I love them…The LC holds my daily carry tools as a General contractor who does much of his own finish carpentry . I looked at the larger bags but they seem to get too heavy for how I work. Everything came our of my old CLC totes directly into the bag. It’s much faster and easier for me to have a big enough set of tools rather than leaving multiple bags in the van and making trips throughout the day. I tend to move it room to room as I go as I normally find a belt too dangerous to wear around finished product. I also have the open tote in the LC size. The larger tote seemed like too much to carry. I’ve owned and still own multiple rolling stacking boxes, every other brand of bag and tote, and just a lifetime of trying to make it easier on myself to actually do the work. The Veto is worth the money hands down
Jared from Utah –
This bag will undoubtedly
This bag will undoubtedly live longer than I will. It was probably overkill for a DIY type like me – but having worked the trades in the past I can say this would have stood up to some regular abuse. The organization capabilities are unmatched, and the durability leaves nothing to be desired. I would love to get one of these bags for each set of job-specific tools that I own.
J. Moore –
My LC is my first Veto. I’ve
My LC is my first Veto. I’ve got to say it’s a great bag easy to organize. Bought an MB shortly after my LC and it is the perfect meter bag. Once you Veto there’s no going back!
Andrew Phelps –
This bag is amazing. I sold a
This bag is amazing. I sold a guitar I loved to buy this bag so that transitioning careers at 34 yrs old wouldn’t seem so crazy. I wanted to be taken seriously and this bag has the professional look and convenience I was looking for. I’m currently in trade school for hvac and wanted the tech Lc but I couldn’t afford it, so I had to go with the contractor LC. It’s still an amazing bag and I’m excited to start a new career.
Jim D –
I got this bag 4 1/2 years
I got this bag 4 1/2 years ago and never registered it, the zipper had pulled apart after 4 1/2 years of using it for my HVAC tools, the supplier that I bought from was able to pull my prof of purchase so I went to the web site and made a claim, I had a new loaner bad with in a week, I sent my bag back in the box the loaner came in, and today I got an email saying to just keep the loaner, I’m good with that thank you, before getting a Veto bag I would change bags every year but not with this Veto LC bag, I also have the meter bag, great bag, hooks to the side of my LC bag, I plan on getting the CP4 bag next. Best bag to get. Ever.
Russ –
I’ve had a lot of tool bags
I’ve had a lot of tool bags but never one this nice. As an electrician I’ve had many open type bags that have spilled over into my van. The closed design of this bag is great. The LC seems to be the right size for me as a larger bag full of tools would be too heavy.
Chris Ricardo –
I’m in Hvac. I’ve had many
I’m in Hvac. I’ve had many tool bags in my time but this is the best bag you can invest in tough and practical it fits all my tools and it’s easy to carry up ladders or through tight situations, veto they have the market with quality and I live by my tools, thanks veto
Starr Smith –
I have wasted a lot of money
I have wasted a lot of money on other tool bags but this one as soon as I received it I could tell immediately that this was definitely a keeper. Plenty of room for all my tools and drill. The bag is built really good and has a great shoulder strap. I can just say that its AWESOME!
Starr
Christopher Marsala –
Exactly as i expected. I am
Exactly as i expected. I am an IBEW Member Local 176 Joliet Il. This is the bag I was looking for, I no longer have to dig to find exactly what i am looking for.Perfect design,right size for me and my profession.Thanks. Only criticism is it,s made in China.would have gladly paid more for Made In the USA.
Chris M
David Wolfe –
I got the LC for Christmas
I got the LC for Christmas and loaded it up with my tools from my tool box. I am really enjoying working with this bag ,its much easier to carry than my tool box with the same amount of weight in it. I like the way you can fold down the zippered panels and snap them in place which allows you to pick up the bag and move it around without closing everything up,but if you put anything in the lower larger outside pocket besides a piece of paper the panel can’t snap in place because the fold line goes through the center of the pocket and won’t fold if there is bulky items in it,other than that the bag is working well for me
JR –
It is by far the best bag I
It is by far the best bag I have seen out there, it is very well built for almost any situation. I work in an offshore environment in a industrial shipyard, it sees all kinds of weather and punishment, i am a crane technician and i carry all my hand tools and meter in it. When heavy machinery stops working you have to go to it, it doesnt come to you, it gets heavy when i have it full, because i can organize alot of tools and save a few trips to the shop.I read all the reviews and thought about it for a while but i do not regret it, i love how this bag can organize everything so i dont have to dig thru tools at the bottom of the tool bag.Very well built and i like the hard plastic on the bottom since i work very close to docks and on barges even if the surface is wet my tools keep dry, unlike my other tools bags. Well worth the price, i can carry on my LC a set of combination wrenches 1/4″ to 1 1/4″, a set of 4 pliers, 3 vise grip wrenches, 16oz ball peen hammer, 18″ breaker bar, 8 scredrivers, 4 sets of sockets metric and standard on 3/8 drive and 1/2 drive, a set of punches, a set of snap ring pliers , and i still have room for more. Definitely would recommend it.
seely –
This was the first veto I got
This was the first veto I got and it’s the best keeps thing in a place and made me be more organized I used to have an open top bag and would just toss everything in and dig all day now I set up unzip and do work love the product and can’t beet the warranty
Dale –
I work in a large facility as
I work in a large facility as the Facilities Manager. My responsibilities are many from A to Z. I was always looking for the right combination to carry what I need on a daily basis. This LC bag is it, and now the search is over! The LC carries everything I need and then some. I also use the Veto Meter Bag and Meter Pouch, which I keep one clipped to the tape measure holder on one end of the LC and the other is clipped in the small pen holder pouch on the other side of the LC. This way I can customize what I may need for a specific task. Veto Products are top notch and well thought out.The overall construction and durability are well worth the price point.
Dave Bartholomew –
This is the second Veto prep
This is the second Veto prep Pac tool bag I’ve owned. I’m glad to say that the first is still going strong (laptop bag). I work as a electrical contractor and normally my tool bags don’t last the pace. The Veto however is the exception to that rule. These bags are so robust they withstand everything I throw at them. Your tool bags shouldn’t need reviews as they are by far the market leader….the Rolls Royce of the tool bag world. — An extremely happy customer — Dave, London, UK.
Rudy –
I got my Veto LC as a
I got my Veto LC as a Christmas Present. I have had a few other tool bags, and the end up not lasting long at all. When my Veto LC arrived I was very impressed by the pocket layout, construction of the bag, and just how much it could carry. Yes its a heavy sucker and I have it loaded to the hilt, but man I cant say enough about this bag. I am not a contractor, I am a firefighter that likes to work with his hands fixing things when I am away from the job. I can say for someone who is not in the trades on a daily basis, this bag is King of them all, If you are looking for a good bag, Get a Veto, you will not regret it!
Ryan –
It’s a good bag, well
It’s a good bag, well constructed. I’m not overly impressed with the bag at its price point.
Brett –
I bought the LC because I
I bought the LC because I wanted a smaller tool bag. I’ve had larger bags and found that I carried more than I needed, making the bag exceptionally heavy and awkward. With the LC I can still carry more than I need and still find room for my rattle gun. Yet the bag is more navigable in tight areas, stays upright, and has all of my tools organized and easily accessible. My only regret is that I didn’t know about the Tech LC until I had bought my LC. Being a Master HVAC/R technician, the Tech LC would be an even better fit. I plan on investing in the Tech LC within the next year. — All around GREAT tool bags!
Mike Kunnen –
I’ve owned the XXL, the XL,
I’ve owned the XXL, the XL, the OT-XL and just purchased the LC. The XXL was great when I was younger and framing. After hitting forty, I switched to the XL and OT-XL and kept my smaller hand tools like screwdrivers and chisels in the XL and the larger tools like Channel locks, pry bars and my hammers in the OT-XL. I recently started working more in my shop more and found I didn’t need all of my tools everyday so I’ve added the LC to my Veto collection for my daily use tools. — Very well made and designed for professional use.
Jcelectric –
I am a Master Electrician by
I am a Master Electrician by trade and have been threw hundreds of tool bags made by all different manufacturers threw the years. I find that all of the tool bags just don’t hold up they just rip at the bottom when you have lots of tools in them or the zippers that keep them shut break. They all seem just poorly made. Until I came along the Veto Pro Pac LC bag. It is the perfect size so you can load it up with tools and still not be to heavy. It has the heaviest duty zipper I have ever seen on a tool bag. The bottom heavy duty plastic just wont break no matter what I seem to load in it and drop not to mention the heavy duty internal pockets for tools. This bag and the whole line of Veto Pro Pac bags are hands down the best thought out well constructed tool bag on the market. I now own the LC the XLT and the Tech Pac and plan on buying more. Take it from me cant go wrong with these bags. Thanks for making such great bags. — Joseph Castronovo Jr., Master Electrician, Boston, MA., USA
Brian Shiels –
Been looking for a long while
Been looking for a long while now for a toolbag to suit the tools I need on a daily basis for the electrical works I carry out. Thanks to Veto I have found it. Can’t fault this bag in quality,looks and storage for tools. Quick and easy access with all my tools on visible display for instant item find. This bag will definitely be hard to beat!! – Brian Shiels, Electrician, Glasgow, Scotland
Ed –
I like the LC bags, since I
I like the LC bags, since I can carry my carpentry specific tools. The pair carry everything that I need, so that once on the job trips to the truck are minimal. The LC bags are small, so you can navigate thru narrow hallways and small houses. The small size does not mean low capacity. They are great when doing kitchens and baths, since everything you need can fit in the bag. When you need to move around in a small area you are not dinging up all of your new work!
josedaniel –
I own 5 veto’s xl, ot-lc, tp3
I own 5 veto’s xl, ot-lc, tp3, mb and lc,a have to say they are all amazing but the lc is my favorite just because of the size but I keep swapping my tools to xl when I want to use it, i use my ot-lc for home use but I love them all.
Chris –
Great for any technician of
Great for any technician of any trade to carry a lighter load. I downgraded from the XL to the LC after I started working in a plant environment on a regular because I wasn’t driving my truck everywhere in the plant for every little issue. Carries everything required and room to spare.