Tool bags
Tool Storage
Made in USA
Tool Bags By Trade
Everyday Carry
Find A Dealer
TP5BVPP10078
$94.99
Portable Service Tool Pouch designed to hold smaller meters and hand tools. With more capacity than the TP4B, it features a plastic hard bottom offering moisture protection and stability, along with a variety of vertical tool storage options.
In stock
Description
The TP5B is a clip on service tool pouch designed to hold smaller meters and hand tools. With more capacity than the TP4B, it features a plastic hard bottom offering moisture protection and stability, along with a variety of vertical tool storage options.
Specification
PRODUCT SPECIFICATIONS:
- Height (H): 11" (28cm)
- Width (W): 10” (25.5cm)
- Depth: 5” (12.5cm)
- Weight (empty): 2.5 lbs. (1kg)
- Max Payload: 15lbs (7kg)
- Internal Volume: 300in3 (5L)
MAXIMIZED TOOL STORAGE CAPACITY:
- Vertical Tool Pockets: 20 interior and exterior
- Small Meter Pockets
- Flap Bit Pocket
- 2.5" Wide Belt Slot
- Adjustable Velcro Tool Loops
- D-Rings: 2 small
- 8" Electrical Tape Strap
RUGGED MATERIALS & CONSTRUCTION
- Leather Trim Panels
- D-Rings: Powder Coated Steel
OTHER FEATURES:
- Detachable Rubber Handle
- Metal Tape Clip Holder
- Metal Pouch Clip
- Warranty: 5 Years (see Veto warranty terms and conditions)
Download TP5B Product Sheet
Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!Video & Product Sell Sheet
Customers Who Bought This Also Bought This
12 reviews for TP5B
You must be logged in to post a review.
mdetzler –
I am giving this bag 4 stars as I will see how it holds up over the next few years.
Commercial HVAC tech. I use this for grab and go service/maintenance. As others have said the back 5 pockets are not the same exact size as each other, seems a minor lack of quality control. But an overall durable product for a couple months of use. This is the most durable feeling pouch I’ve ever had.
Looking forward to putting it through some serious work.
rrl13007 –
This bag is perfect. Holds more than a regular pouch, but stays handily near by standing upright on its own.
Heathfrankfort –
This is my 3rd veto and so far it suits my needs almost perfect the tp3 was to small. The only thing that this bag is missing is a shoulder strap, when climbing alot of stairs the start would help out alot. Other than that it is a great purchase to go with my backpack
Gr1m666 –
Great pouch. I use it for the tools that I use infrequently, but still want to keep handy. I use the TP-XL for the common use tools & this makes a good secoundry bag.
If you load it top heavy it may tip, but if you keep most of the weight low its very stable, which supprised me. Good layout, I personaly dont have a use for the adjustable side bands, but its great that they can be removed. Would love a measuring tape clip on the side, but the loop where I removed the band from works. J – Electrical Service Tech & Appliances – NZ
KingdomFamily1 –
As A Maintenance Technician For Apartment Homes. This Bag Is Pretty Awesome, It Carries All The Tools I Need To Perform My Duties, Can’t Really Complain About It.. I Love The Bag. I’ll Be Buying A Bigger Bag For My Power Tools Soon.
criscrete911@gmail.com –
I’ve thought about buying this bag for awhile. Glad I did. This bag holds everything that I need. Using this bag daily as a commercial and industrial electrician makes it so much easier. This bag is very sturdy, does not fall over, and has entry of room.
tontoe –
Greetings from a UK electrician.
I finally gave up on my deWalt tool pouch when it tipped over for the umpteenth time and deposited my tools on the floor.
It has a hard, flat base and will stand on its own.
I can get all my regularly-used electrical tools in it, and the carrying handle is sturdy and comfortable. It’s very ruggedly built. It will also fit on my tool belt [deWalt belt but with Makita braces cos the deWalt ones are SO useless 🤣🤣] so I can take everything when working up a ladder.
Stuff stays where it is put and the insulation tape holder is a brilliant addition.
At first I thought it was expensive for a tool pouch, but it really delivers. And having used it now for two months, it was worth every penny and I would actually have paid more 😊😊
Aceves0226 (verified owner) –
Amazing bag I have all my service tools in this bag and are very visible so I don’t have to be scrummaging around for any tools
Voltiumchito –
A year after purchasing the tool bag started to fall apart the back clip came loose the handle’s clip now doesn’t clip and keeps falling off the pouch weight with tools is uneven bag keeps falling forward I mean it’s a great concept and it’s an amazing pouch but it has a lot of defects
Jared.sheehan@outlook.com –
Awesome pouch, suits my needs as a service electrician and fits all the tools I need and a bit more. The solid base is stable so I can place my tools anywhere.
So glad I did the research and bought This product.
earlsouthwood@gmail.com –
I stepped up to this bag from the TP4, as I needed a little more room and I wanted the flat bottom. Like all Veto products, this is well made and let’s me carry the tools I need as a factory electrical tech.
Brendon –
I’ve been using this tool pouch for a couple of weeks now, and I really like it. My only complaints are that the 5 tool pockets are fairly inconsistent sizes compared to each other as well as the side pockets with their match. Once I figured out where to put what I want and where it could go though I haven’t dealt with it since. Overall I am happy with it so far and will make sure to put it through it’s paces.