Veto’s lunchbox-sized cooler safely keeps the critical items that power your day. The hybrid design melds the functional appearance of a soft-sided lunchbag with the performance of a hard-sided cooler. Secured via magnetic latch, the zipperless lid can be easily opened with one hand when on the road. The LBC-10 offers significant internal volume insulated by 1” (2.5cm) of rigid, expanded polypropylene foam. The injection molded polypropylene plastic liner is easily removed for rinsing out spilled liquids. An included interior tray keeps small items and cutlery separate and accessible, can be slid left or right, or can be removed to accommodate larger meal items. The bag exterior features a zippered front pocket for storing everyday carry needs. Additional features include an over-molded elastomeric/polypropylene waterproof LC base and a reflective band around the perimeter. Note: Ice Pack not included.

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!