TR1 (Probe and Lead Roll)VPP10518

From $69.99

Handmade in New England (USA), the TR1 roll is ideal for storing and protecting meter test leads and specialty probes. It is also a handy little pouch for small tools and instruments. The TR1 is a ruggedly built tool roll with 4 individual zippered pockets all constructed with durable mesh for breathability. The 2 lower pockets are lined with vinyl for protecting sensitive probe tips. The aluminum hook for securing the tool roll closed can double as a hook for hanging the open roll. Our stainless steel Repositionable Belt Clip (RBC – sold separately) can also be added to the rear webbing loop for attaching to a waist belt or side of tool bag.

In stock

- +
Add to Compare

Description

Handmade in New England (USA), the TR1 roll is ideal for storing and protecting meter test leads and specialty probes. It is also a handy little pouch for small tools and instruments. The TR1 is a ruggedly built tool roll with 4 individual zippered pockets all constructed with durable mesh for breathability. The 2 lower pockets are lined with vinyl for protecting sensitive probe tips. The aluminum hook for securing the tool roll closed can double as a hook for hanging the open roll. Our stainless steel Repositionable Belt Clip (RBC – sold separately) can also be added to the rear webbing loop for attaching to a waist belt or side of tool bag.

Specification

PRODUCT SPECIFICATIONS:

  • Bag Height (H): 20.5” (52cm) - unrolled
  • Width (W): 7.5" (19cm)
  • Depth (D): .5" (1.25cm)
  • Weight (empty): .4 lb (.2kg)
  • Max Payload: 5lbs/2.25kg

MAXIMIZED TOOL STORAGE CAPACITY:

•   Made in USA •   Compact design for spare leads and varied probes •   Rugged construction •   Aluminum hardware •   4 Zippered pockets: 2 breathable mesh; 2 vinyl lined mesh •   Optional Repositionable Belt Clip (RBC) – sold separately

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video & Product Sell Sheet

Reviews

There are no reviews yet.

Be the first to review “TR1 (Probe and Lead Roll)”