Find A Dealer

TECH PAC CAMO DNA

$309.99

The Tech Pac Camo DNA is a stable, non-tipping back pack that holds tools and meters for technicians that need to climb ladders or walk long distances to access their work locations.

- +
Add to Compare

Description

The Tech Pac Camo DNA (Mossy Oak® Country DNA Pattern) is a stable, non-tipping tool backpack tool bag that holds tools and meters for technicians that need to climb ladders or walk long distances to access their work locations. Perfect mobile tool storage.

Specification

PRODUCT SPECIFICATIONS:

  • Height (H): 19.5" (49.5cm)
  • Width (W): 13" (33cm)
  • Depth: 10" (25cm)
  • Weight: 10 lbs/4.5 kg
  • Internal Volume: 1550in3/25L
  • Max Payload: 50lbs/23kg

MAXIMIZED TOOL STORAGE CAPACITY:

  • Mossy Oak Country DNA Pattern
  • 46 interior and exterior pockets
  • 2 Storage bays – 4 Storage platforms
  • Manifold gauge and hose storage pocket
  • Padded EVA thermoformed, ergonomic back padding
  • Waterproof Polypropylene plastic base for moisture and abrasion protection
  • Quick release metal hasp allows easy access to rear storage bay
  • YKK® interlocking zippers
  • Interior Magnetic Screw Catcher
  • 8" electrical tape strap

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

TECH PAC CAMO DNA PRODUCT SHEET

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

There are no videos available for this product