Find A Dealer

TECH PAC HI-VIZ ORANGE BACKPACK TOOL BAG

$299.99

- +
Add to Compare

Description

The Tech Pac Hi-Viz Orange is a stable, non-tipping back pack that holds tools and meters for technicians that need to climb ladders or walk long distances to access their work locations.

Specification

PRODUCT SPECIFICATIONS:

  • Width: 9.875”
  • Length: 14.25”
  • Height: 21.5” (19.5 with Handle Folded Down)
  • Weight (empty):  9 lbs.

MAXIMIZED TOOL STORAGE CAPACITY:

  • Vertical Tool Pockets: 46 interior and exterior tool pockets of various sizes
  • 2 Storage Bays- 4 Storage Platforms
  • Manifold Gauge and Hose Storage Pocket
  • D-Rings: 4 large and 5 small
  • Outside Mounted Stainless Steel Tape Clip Holder
  • Pocket for a tablet or laptop is only 7" X 10"; fits a small laptop or most tablets

RUGGED MATERIALS & CONSTRUCTION:

  • LOAD TESTED: PULLED TO DESTRUCTION AT 830 POUNDS (Handle failed); Hook failed at 200 Pounds
  • Weatherproof Base: 3mm Injection Molded Polypropylene
  • Weatherproof Body Fabric: 950 and 1250 PVC Impregnated Denier Nylon
  • Weatherproof LIGHT GRAY Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon- LIGHT GRAY FOR BETTER VISIBILITY
  • Quick Release Metal Hasp: Allows Easy Access to Rear Storage Bay and Creates Positive Shoulder
  • Strap Load Connection
  • Internally Stored Aluminum Hook to Hang Bag
  • Over-Molded Ergonomic Grip
  • Padded EVA Thermoformed, Ergonomic Back Padding
  • Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
  • Metal Shoulder Strap Sliding Buckles
  • D-Rings: Powder Coated Steel
  • Rivets: Marine Grade Rivets
  • Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:

  • Adjustable Padded Shoulder Straps
  • YKK Locking Zippers
  • Magnetic Screw Catcher
  • Tablet/All-Purpose Zippered Pocket
  • Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight9 lbs
Dimensions14.25 × 9.875 × 21.5 in

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

There is no Video available for the product