The DP3 is a multi-functional pouch designed to function as both a drill holster and tool pouch. With 17 interior and exterior pockets, this pouch can hold a variety of tools. Featuring a pass-through drill holster, the pouch can accommodate most drill sizes with any size drill bit needed to get the job done. This pouch includes our removable and repositionable belt clip (RBC) that is attached to the molle-strap on the back. The RBC can be used to attach the DP3 to a belt or larger tool bag. This pouch also has a stable, soft-sided synthetic rubber-lined base that allows it to stand up on its own. Whether you prefer to travel lightweight or need a quick grab-bag for a service call or some extra storage for your current tool bag, this versatile pouch is a great addition to your tool storage arsenal.

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!

DP3 PRODUCT SHEET