Tool bags
Tool Storage
Made in USA
Tool Bags By Trade
Everyday Carry
Find A Dealer
TP6BVPP10460
From $124.99
The TP6B is a one-sided, open top compact-sized tool pouch that holds a variety of tools, meters, fasteners & wire nuts. The exterior pockets include a weather resistant rear storage area ideal for sensitive probes. The TP6B features a wide open interior that can be reconfigured via the included, removable V-SWAP Front Tool Panel featuring 3 pockets and an elastic tension strap. Remove this panel to gain more bulk storage capacity for larger items or parts boxes. Additional Front Tool Panels, as well as the Front Bulk Storage Panel, may be purchased separately below. The TP6B is for techs needing a compact bag for service calls requiring just the minimum amount of tools.
In stock
Description
The TP6B is a one-sided, open top compact-sized tool pouch that holds a variety of tools, meters, fasteners & wire nuts. The exterior pockets include a weather resistant rear storage area ideal for sensitive probes. The TP6B features a wide open interior that can be reconfigured via the included, removable V-SWAP Front Tool Panel featuring 3 pockets and an elastic tension strap. Remove this V-SWAP panel to gain more bulk storage capacity for larger items or parts boxes. The TP6B is for techs needing a compact bag for service calls requiring just the minimum amount of tools.
Specification
PRODUCT SPECIFICATIONS:
- Height (H): 11.5" (29cm)
- Width (W): 12" (30.5cm)
- Depth (D): 8" (20.5cm)
- Weight (empty): 3.5lbs/1.5kg
- Internal Volume: 290in3/5L
- Max Payload: 20lbs/9kg
MAXIMIZED TOOL STORAGE CAPACITY:
- 14 Internal pockets
- 11 External pockets
- V-SWAP™ removable & customizable tool pocket panel system
- 2 Metal tape clip holders
- “Hang-up” hook
- Tarpaulin covered rear pocket for added weather & abrasion protection
- Detachable over-molded elastomeric grip
- Waterproof Polypropylene plastic base for moisture and abrasion protection
- 5-Year warranty
Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!Download The Product Sheet of
Video & Product Sell Sheet
Customers Who Bought This Also Bought This
Out of Stock
26 reviews for TP6B
You must be logged in to post a review.
cfloyd –
Came as a FREE gift with the order of a backpack! Great small bag for quick jobs, but carries a ton of tools. Full size drill fits in back zip area!! Keeps with Veto durability and quality of build. The built in hanger is great too!
matt-7817 –
Great bag for HVAC troubleshooting. Carry’s what you need for those long hauls across commercial roofs.
Biggest problem is that it tips over too easily. Bottom base needs to be bigger.
pin.proxy (verified owner) –
I have been enjoying my TP6B immensely. I do line maintenance on Boeing 767s and this has become my 90% go-bag. No more rummaging through a tool bag, every tool is easily accessible.
danimacl700 –
I am one of those guys who was always changing storage configurations trying to find the ultimate setup for many years. I genuinely think this bag is the ultimate work edc bag for me as a commercial electrician. It carriers everything I need plus some. Love the hook because the way I load it can get very heavy. And I’m always carrying it around. I load it up with the following:
-m12 fuel impact
-m12 rover light
-Fluke t+pro
-NCV tester
-linesmans, side cutters, needle nose
-a couple multi bit screw drivers, a couple fixed blades, and multi bit stubby
-10” cobras and twin grip pliers.
-Olfa knife
-torpedo level
-marker, pen, pencil
-various 1/4 driver bits including Malcos, and 1/4 hex drill bit, 1-3/8 step bit
-mag ball magnetic stud finder.
-gloves
-tape measure
-misc wire nuts, zip ties etc.
Like many others I got it as a part of the summer promotion when I ordered my TP-XX another great bag. If Veto has another promotion I’ll probably have a problem because I’ll keep buying more bags. This is the best promotional product I have ever received.
Room for improvement would just to make the front pocket a bit bigger. I do tip it over quite a bit because the bottom base is pretty small. For me if the distance between the front where the pliers go and the back where the screw drivers go could be just a bit bigger. Not top to bottom depth or bag width, as in front to back length. I like to store my m12 rover light, gloves and tape measure in that space and it’s just a tiny bit too snug. Plus if it was a bit longer it would stop tipping forward all the time. I probably fill the bag up with more stuff than most people however.
espo61 (verified owner) –
Absolutely the best tool bag I have ever owned!
The TP6B is built excellently as are their other bags and I’ve had several of my fellow employees who are going to purchase one.
I plan on getting another Veto bag for just my meters and probes.
This is a beautifully made bag and extremely strong! I highly recommend VETO products to anyone looking for portable tool storage!
They will also send you a free full color catalog of every bag they sell which helped me decide on my first bag!
Thanks VETO fir excellent quality!
Steve Esposito
zpbrown84 –
I picked this bag up for free when I purchased my OT-MC during the Spring Promotion. Since I got this bag and started using it I have loved it. This bag is the perfect size to tote on a diagnostic call. It has just enough room for the basics, a couple of screwdriver, wire strippers and some pliers. The side pocket is just right for a meter as well. If you need a bag that can hold the essentials and is easy to carry this is a great option, and like all the other products from Veto the quality is amazing.
Ivan Garza –
I knew when I first saw the tp6b that I had the perfect use for it . I has been wanting a small open top bag that was organized enough for all my electrical tools. The inside I used it for my insulated screwdrivers insulated pliers portable speaker testers and m12 batteries. On the outside for extension screws m12 surge and another m12 battery. This tp6b is small but it will get the job done .
mcidk413 –
This is my go to bag for all my initial assessments of any job. It holds all the basic tools I need. It’s a nice, light, compact bag. I also threw a shoulder strap on it to make it hands free walking into the job without the bulky weight of the bigger bags like the tp xxl. The hanger is bonus allowing you to hang the bag up close by rather than sitting on the ground and constantly bending over. Great bag for the size!
JohnHolliday –
I was lucky enough to get this bag free on the spring promotion, but, I was looking at buying it before it came up on that sale. This is my go to bag for ladder work, it fits that need perfectly. I load this up with what I’m going to need, and loop it around the top peak of a ladder, or, sling it around my shoulder, messenger bag style. The clips on the handle make it easy to snap it around a rung on the ladder as well. For me, it’s been a huge blessing, and saves trips up and down, and keeps tools at hand that I need.
Veto as a company, is amazing. They went so far above and beyond what they needed to, and thought nothing of it. If you are on the fence of becoming a Veto customer, don’t be. Customer service like this is like finding a unicorn living in your backyard, and it sneezes $1,000 bills. I’m just a normal customer, and paid for all of my Veto gear with my own money.
Calin Daraban –
Hello friends and I’m glad I found you, I received this bag as a result of buying a bigger bag during the OT-XXL promotional period, it helps me a lot when the big one is in the car full of tools, I take the tools I need from the big and I only put in Tp6b what I need for maintenance, it’s light and offers many advantages, pockets, it’s what I need, if I were to buy it, I wouldn’t hesitate, we thank the Veto team because they offer gifts during March-May for customers who buy, thank you for the very good bags and the 5-year warranty, I warmly recommend Veto Pro Pac 👍👍👍☕️
timmy6208 –
I spefically purchased this bag because I already own other veto bags and I saw a coworkers. I definitely like the open top, no more zippers. the pockets could definitely be wider and easier to access, I did not like how they sewed up sides of the back and front pouches, that made it very difficult to get into. I would given 5 stars but this bag still has faults with pocket placements and design. Overall I do like it best of my other veto products.
Julianf82 –
This bag is great if you like to have easy access and keep your tools organised! Don’t let the size fool you, I have plenty of tools fitted in as screwdrivers, pliers, electric meter, cutters etc, all fitted in perfectly. Also could fit other bits and bobs in but don’t want to overload it. As an electrician is perfect for small jobs without carrying out big bag. Already I’m waiting for Veto Pro Pac Tech Pac tool Backpack. Can’t wait to get it.
krugerpianoservice –
I got this bag free with the spring promotion when I bought my TECH PAC WHEELER tool bag. I’m a piano technician and use mainly tuning and regulation tools on service calls, all of which are in my main bag. But I have bulkier tools like my cordless drill kind of floating around in the trunk of my car. This bag provides a very neat and convenient way to pop out to my car and grab one unit to carry extra tools into a client’s house for those heavier-duty jobs. I’m happy to have received it for free, but with the excellent quality and practicality, I would have been happy to pay full price for it sometime down the line. I’ll definitely be getting more products from this company regardless, all of their stuff I’ve seen so far is very well-made and their customer service is also excellent.
gabem129@gmail.com –
Just picked this up from the promo. So far it’s way better than I expected. Didn’t think I’d enjoy an open top bag. It’s somehow compact and spacious. Not sure what kind of sorcery these engineers are using but I like the bag a lot.
sco4 –
Perfect service call out bag, vswap for the win!
Jay Jordan –
the TP6B is the best , easiest carry bag I’ve ever owned !! All your most used tools are right at your finger tips ! keep up the good work Veto
pablonirve23@gmail.com –
Solid bag. I use it everyday. Highly recommend it for people who like to be organized. When I pull up with this bag customer don’t question my professionalism. Will probably buy more once if gets in stock.
rosanagm02@gmail.com –
Bought the TECH MCT tool bag and received the TP6B free. The TP6B has become my everyday work bag. It’s compact, but not too small.
John Pennabaker –
I’m a industrial electrical , and rceived the TP6B as part of the promotion.
It’s a nice little tech bag that I have used for many different applications. From terminating motors, to doing control work this little bag comes in vary handy.
Philip A. Zungali –
It’s small but not to small & very light and what cool thing about this tote is that it has the v-swap spots where it has a v- swap label and that’s where the extras get connected
Simoestoni@aol.com –
Perfect bag small but big enough to make small job on site 😉
dray.nathaniel@gmail.com (verified owner) –
Very happy with the TP6B. I recently moved into an electrical technician role, away from a more contract electrician job. I had the Tech OT-MC which I loved, but just didn’t need to carry as many tools anymore. The TP6B is perfect for the light service work I need to perform. Veto calls it a “pouch” but it really is more of a small tote. It easily carries a few screwdrivers, snips, knife, Knipex, 4″ magnet tray, M18 screwdriver/drill, an extra battery, my LOTO locks and a few sharpies/pencils/torque paint pens. I love the stow-away hook that comes with this tote- the one-sided design of this tote makes it really easy to hang the TP6B at working height on gear and have my tools easily accessible. I also hang it in my service van so it never tips over while driving. It is clearly Veto quality which will last a long time. My only complaint is that the front and rear velcro pouches don’t fit much once you have filled out the main compartment, but that is not a big concern.
Matthew Traverso –
I absolutely love this bag. Amazing quality. The only thing I wish was different is the large side pocket, if it was just a little bigger I could fit a meter with the leads in also if the rear pocket opened just a little more so I could fit a small parts container. If it had those two things it would be the perfect elevator service bag.
Brennen Schall –
Perfect for service calls or a secondary bag. When you don’t feel like carrying around every tool that you have.
Thomas Mills –
Love the bag! I received it with the spring promo, when I purchased the Tech LC. My first bad was the MB2 which is now an actual meter bag and my TP6B is my daily bag now. I wanted the TP-LC and was happy to realize this bag is very close minus the cover. I did snip the top stitches on the side panels on the back and front Velcro pouches, it allows you to actually put your hand in there. I don’t feel like those stitches are necessary for integrity, not sure why they were there. Overall, I am very happy and will be making another purchase soon for a larger bag or tote!
Kyle Jones –
I absolutely love this bag. I got it for free during the March promotion when I purchased my Blackout Backpack. It worked out because I was looking at this along with the backpack. It’s an even better deal when it is free. With that being said, I would not hesitate to pay full price for this. It works that well for my use/need. I primarily use this bag to hold my hand tools while working on a lift. I love that I am able to stay organized while keeping my tools in reach. It works much better for me than my TP XXL on a lift when I only need a few tools. If it holds up as well as my TP XXL (which I am sure it will) I will be a happy camper.