Find A Dealer

TECH PAC BLACKOUT BUILD-OUT

From $180.01

or 4 payments of $45.00 by Afterpay More info

Tech Pac Blackout Build-Out is a fully customizable Backpack. Customers MUST PURCHASE AT LEAST 2 V-Swap™ REMOVABLE AND EXCHANGEABLE PanelsV-Swap™ Panels include Tool, Meter, Laptop and Bulk Storage Panels which are all SOLD SEPARATELY (vetopropac.com/catalog/v-swap-tool-panels)

- +
Add to Compare

Description

The TECH PAC BLACKOUT Build-Out is a stealth black version of the best-selling TECH PAC backpack. The bag features Veto Pro Pac’s proprietary V-SWAP™ system designed to accept tool, meter, laptop & bulk storage panels – all sold separately. Added panels can be swapped out enabling tool, gear or job specific storage solutions. CUSTOMERS MUST BUY 2 PANELS.

Specification

PRODUCT SPECIFICATIONS:

  • Bag Height (BH): 19.5”
  • Handle Height (HH): 22"
  • Width (W): 13"
  • Depth (D): 10"
  • (49cm BH x 33cm W x 25cm D)
  • (56cm HH x 33cm W x 25cm D)
  • Weight (empty):  10 lbs/4.5kg
  • Internal Volume: 1550in3/25L
  • Max Payload: 50lbs/23kg

MAXIMIZED TOOL STORAGE CAPACITY:

  • V-SWAP™ removable tool pocket panel system (panels available and sold separately)
  • Tactical all-black construction
  • Exterior manifold gauge & hose storage pocket
  • Interior magnetic screw catcher
  • Thermoformed cushioned EVA back pad
  • Waterproof polypropylene plastic base
  • Quick release metal hasp supports load & allows easy access to rear storage bay
  • YKK® zippers
  • 5 year limited warranty

OTHER FEATURES:

  • Metal YKK® Locking Zippers
  • Magnetic Screw Catcher
  • Warranty: 5 Years (see Veto warranty terms and conditions)

TECH PAC BLACKOUT BUILDOUT PRODUCT SHEET

Additional Information

Weight 10 lbs
Dimensions 13 × 19.5 in

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TECH PAC BLACKOUT BUILD-OUT”