Description

The EDC PAC MCB is a TSA approved medium-size everyday carry backpack scaled to fit easily under an airplane seat. This backpack inherits Veto Pro Pac’s tool bag DNA with a waterproof injection molded polypropylene base and rugged body structure that allows the EDC PAC MCB to remain upright and stable. The bag’s main compartment is perfect for supplies, gear and other everyday essentials. A separate semi-rigid zippered compartment at the top is designed for protecting sunglasses or safety glasses. An additional zippered front pocket offer several organizational compartments for technology or personal items. In the rear is a dedicated laptop compartment with a padded tablet sleeve that can also accommodate 14″ laptops and some 15″ laptops (depending on manufacturer). Large, zippered side pockets unzip and expand to accommodate large water bottles or can be secured closed for storing other daily needs. And finally, the EDC PAC MCB features a familiar solidly attached rubberized haul handle to grab, grip & go!

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

EDC PAC MCB CARBON PRODUCT SHEET