Find A Dealer

MB-CTLC

Rated 4.00 out of 5 based on 1 customer rating
(1 customer review)

$134.99

The MB-CTLC is a zip-closure open-top tool tote bag.

Out of stock

Add to Compare

Join the waitlist to be emailed when this product becomes available

Description

The MB-CTLC rubber base tool tote is an open tote with a zip closure option for secure one-handed gear or tool storage to and from the boat…or wherever needed. For tradesmen, technicians, contractors, boaters, fishermen, etc. Great for weekend use as well!

Specification

PRODUCT SPECIFICATIONS:

  • Height: 14" (35.5cm)
  • Width: 13.5" (34.5cm)
  • Depth: 9.5” (24cm)
  • Weight (empty): 3lbs (1.5kg)
  • Max Payload: 40lbs (18kg)
  • Internal Volume: 2200in3 (36L)

MAXIMIZED TOOL STORAGE CAPACITY:

  • 5 Exterior Vertical Pockets
  • 6 Interior Vertical  Pockets
  • Non-Marking TPR Rubber Bottom
  • Open or Zip "Closed" Option for Security
  • YKK® Zippers

RUGGED MATERIALS & CONSTRUCTION

  • Polyester Canvas Body Fabric
  • Leather Grips

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

MB-CTLC PRODUCT SHEET

Additional Information

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

Reviews (1)

1 review for MB-CTLC

  1. Rated 4 out of 5

    owall83 (verified owner)

    I like this bag, it’s built well, and it’s big. I bought a shoulder strap for it, and I think it’s a necessity. People often think it’s a cooler bag, because even though I use it daily to haul all sorts of crap it holds shape like its insulated. I’ve had mine for over 6 months now.
    For some reason, I was under the impression that a Marine bag would offer some amount of water repellency. No where did Veto sat it does. In their video, they mention the material its made of is rot proof because its synthetic. But a fair warning to anyone that purchases it, it will not protect your tools from even a very light drizzle for any period of time. In fact the zipper top design collects water, so I would recommend not leaving the bag upright. Even so, you’ll find a wet bag when you return, but by keeping it on its side, you’ll prevent the hard plastic bottom from collecting water. This bag is well built and thoughtfully crafted, but if they ever remade this bag, Id highly suggest making it so that it can sustain even light rain for a short period of time. If that were the case it would expand its function and purpose.

Add a review