TP3B Tool Pouch

Rated 5.00 out of 5 based on 3 customer ratings
(3 customer reviews)


or 4 payments of $16.25 by Afterpay More info

The TP3B is the Next Generation TP3 Tool Pouch with a Plastic Bottom.

- +
Add to Compare



The TP3B tool pouch is a “Next Generation” revised version of the TP3 with a Hard Bottom, extra tool pocket depth and riveted stainless steel tape measure clip. This tool pouch stands up and is bottom protected.  It\’s the perfect tool storage to help carry and help organize your most needed tools for any job or service call. It also has a streamlined metal clip on the back.



  • Width: 4 1/2”
  • Length: 7”
  • Height: 11"
  • Weight (empty): 2 lbs.


  • Vertical Tool Pockets: 16 interior and exterior of various sizes
  • Includes 2 Vertical Long Shank Side Tool Pockets
  • Belt Slot
  • Low Profile Metal Belt Clip
  • Quick Clip Metal Tape Holder
  • Meter Pocket
  • Bit Extension Pockets


  • Leather Trim Panels
  • D-Rings: Powder Coated Steel
  • 12000 Polyester Tool Pockets & Body Fabric


  • Detachable Rubber Handle
  • D-Rings: 2 small
  • 8" Electrical Tape Strap With Swivel Hooks
  • Nylon Plastic Connection Clip
  • Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight 2 lbs
Dimensions 7 × 4.5 × 11 in

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of TP3B


Reviews (3)

3 reviews for TP3B Tool Pouch

  1. Rated 5 out of 5


    I’ve purchased many tool pouches. This serves as top on my list. My common every day tools fit, as well as my common everyday bits.

    Great customer service!
    When they say, “zero down time” they meant it! Just received my loaner. Thank you much guys

  2. Rated 5 out of 5

    This is a great little bag. Large enough to hold the essentials, but small enough to be on your hip.
    Very well made, should last a lifetime.

  3. Rated 5 out of 5

    lhogan0326 (verified owner)

    I bought the TP3 , then about three weeks later they came out with the “3B”…. Just my luck. I work at a University as an electrician, I am in offices, classrooms and dorm rooms all day long so I cannot carry or wear big bags. I never know what I’m going to need so I just take the basics. I was going to stick with the TP3 but living in Colorado I need the plastic bottom of the B model. The TP4 would be a little too big for getting around the small rooms I deal with so I would highly recommend the 3. I can also fit my meter inside this bag, so for me, it truly is perfect.

Add a review