Find A Dealer


Rated 2 out of 5 based on 10 customer ratings
(0 customer reviews)


Removable Insert Box for the Tech OT Series

- +
Add to Compare


Removable Insert Box for the Tech OT series. The Tech OT Insert Box can be positioned in different locations in the center injection-molded box of Veto’s TECH OT bags. Each box has a cap, and the box can be used to store parts, tools and other accessories.  The Insert Box is designed to specifically fit the grooves of the TECH OT series center injection-molded box.


Height- 9" Length- 4" Width- 2" Rubber Cap Insert Box is designed to specifically fit the grooves of the Tech OT series with center injection molded box  

Additional Information

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!the Zippers From Sharp Objects and/or Excessive Heat

Download The Product Sheet of OT-IB


There are no videos available for this product

Reviews (0)


There are no reviews yet.

Be the first to review “TECH OT INSERT BOX WITH LID”