HB-XL Firehouse Hydrant BagVPP10014
Fire & Safety
Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)


Extra Large Firehouse Hydrant Bag

In stock

- +
Add to Compare


Firehouse Hydrant Bags™ are the latest addition to the Veto Pro Pac line of high quality tool storage products and perfect for:
Adaptors and Cuplings, Gate Valves, Hydrant Wrenches, Turn on wrenches, Dead blow hammers and Flares. Also, a good option for plumbers and other tradesmen.
These bags, as another option, make great carry-all bags for end of the day cleanup, and a more efficient way to organize the back of the fire truck or van.
Designed to stand up to the rigors of daily use, the Firehouse Hydrant Bags™ feature 1800 Denier Body Fabric, leather handle grips and Veto’s signature 3mm thick polypropylene waterproof base. Veto Pro Pac’s patent pending design keeps the Firehouse Hydrant Bags™ standing upright and open at all times for easy access, a feature not seen on other tote products.
The HB-XL has 40% more cargo storage space than the HB-LC; it offers the ultimate bulk storage capacity for larger hydrant or plumbing tools and accessories.
An optional shoulder strap is sold separately.


The HB-XL has

  • Been LOAD TESTED to destruction at 2215 pounds (handles started to break at that weight/force).
  • Height: 16" (41cm)
  • Width: 16.5" (42cm)
  • Depth: 9.5" (24cm)
  • Weight (empty): 6lbs (2.5kg)
  • Max Payload: 50lbs (23kg)
  • Internal Volume: 2650in3 (43.5L)
  • D-rings: 2 Large and 2 Small
  • 3mm Thick Polypropylene Waterproof Base
  • 1800 Denier Body Fabric
  • Leather Handle Grips
  • Compartments for Hydrant or Plumbing Tools

An Optional Shoulder Strap is Sold Separately


Additional Information

Veto Pro Pac Tool Bags Product Care and Maintenance

Zippered Bags: Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Zippered Bags: Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the bag and especially the zippers that is above and beyond what the bag was built for and will eventually cause the nylon fabric to stretch beyond its intended use and the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!


Download The Product Sheet of

Video & Product Sell Sheet

There are no videos available for this product


2 reviews for HB-XL Firehouse Hydrant Bag

  1. Rated 5 out of 5


    Awesome bag, I’m not a fireman and I do HVAC, I find this bag extremely useful in the HVAC trade as the compartments will hold all my refrigeration hoses in one compartment, in the middle compartment I put all my gauges/ manifolds and they sit in there comfortably and the last pocket I put my temperature clamps, refrigerant leak detector, soap, and the small tools needed. Works very well and could potentially fit a scale in the middle depending on which one you have. Amazing bag.

  2. Rated 5 out of 5

    kgrebinar (verified owner)

    Awesome bag. Best hydrant bag we have ever used. Durable and built to last. Everything fits perfect and in a manner ready to deploy. Our only suggestion is to remove some of the extra pockets in the wrench section and use that space for adaptors.

Add a review