TP3 Tool PouchVPP10074
Rated 4.64 out of 5 based on 14 customer ratings
(46 customer reviews)


The TP3 tool bag is a clip-on diagnostics bag which holds a meter and a variety of tools. It clips onto any model Veto tool bag’s tape clip or D-Rings.

In stock

- +
Add to Compare


The TP3 tool pouch is a clip-on diagnostics tool storage bag designed to hold a meter and a variety of tools.
When not in use it can clip onto any model Veto tool bag’s tape clip or D-Rings. It features 15 pockets of various sizes that will accommodate the most commonly used tools to diagnose and repair problems on service calls.



  • Height (H): 9.5" (24cm)
  • Width (W): 5.5” (14cm)
  • Depth (D): 5” (12cm)
  • Weight (empty): 1lb (.5kg)
  • Max Payload: 10lbs (4.5kg)
  • Internal Volume: 90in3 (1.5L)


  • Vertical Tool Pockets: 4 inside & 11 outside
  • 3 Long Shanked Tool Pockets
  • 1 Meter Pocket
  • D-Rings: 2 small
  • 8" Electrical Tape Strap


  • Leather Trim Panels
  • D-Rings: Powder Coated Steel


  • Detachable Rubber Handle
  • Metal Connection Clip
  • Warranty: 5 Years (see Veto warranty terms and conditions)



Additional Information

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of TP3

Video & Product Sell Sheet

46 reviews for TP3 Tool Pouch

  1. Rated 5 out of 5


    Great little tool belt for controls work.

  2. Rated 5 out of 5


    Great little side pouch. Rugged and durable

  3. Rated 5 out of 5


    Bought the TP3 for work in industrial maintenance field and love it highly recommended

  4. Rated 5 out of 5


    This is my 6th veto and I love it. It’s a great little diagnostic pouch. It’ll carry everything you need to diagnose a troubleshooting issue. Will buy more veto bags because you just cannot beat VETO quality!

  5. Rated 4 out of 5

    Exactly what I was looking for. I’m an electrician and I was looking for something that i could carry around for small tasks. This little guy was perfect. Able to put in a couple screwdrivers, channelocks, blade, cutters, bits, and tik tracer and off I went. It’s ability to stand on its is a major plus. The only draw back is that I can barely put anything in that small pocket under the flap to good use. A little bit more depth there would’ve been more useful but other than that I love it.

  6. Rated 4 out of 5


    Love the idea that these pouches clip on to your existing bag.
    Went for the tp3 over the tp3b as was planing on using as a pouch with a belt so thought the hard base would be uncomfortable! Would of liked a tape holder so if you want one best go for the tp3b
    Would like veto to provide a belt for these in the future hence the drop to 4 stars

  7. Rated 5 out of 5


    This bag is great for carrying a few tools from my car to whatever I am going to repair or troubleshoot. I find that most of the time just a few tools are needed for most jobs and this bag carries those tools. I like the feature of a small handle on the back of the bag, it makes it so much easier to carry. The bag has just the right amount of pockets to provide separation and organization of tools.

    I like the way the bottom of the bag is made so that it stands upright on its own. It makes it handy to pull out the tool I need and replace it with just a one-hand movement. The leather panel on the top of the bag it a nice touch of quality and it, too, provides stability for getting tools in and out of the bag.

  8. Rated 5 out of 5

    LRCTbone (verified owner)

    I have only used it for a month but what an improvement over a Husky bag. Outside loops hold my Klein Multi screwdrivers well and the inner loops are big enough to fit tools head down so you can grab the handle. The second pouch is the perfect size for a coast LED light or you can throw wire nuts/material in it. Very happy with it my only gripe is I got two bags and only one sticker.

  9. Rated 5 out of 5


    I bought this as a companion to my Tech MC, and as it turns out this is the perfect simple diagnosis bag for residential HVAC, it carries everything I need to make the diagnosis and make simple repairs, if I need anything else, I go get my Tech MC. Then when I’m done the TP3 hooks on to the Tech MC and its an easy carry back to the van. Great little bag which I highly recommend.

  10. Rated 5 out of 5

    Kyle Jakubs

    This auxiliary tool pouch is great for loading up a specific set of tools needed to complete certain tasks. The belt loop, pocket hook and handle, make carrying, securing and setting up this pouch very easy and versatile. I can wear it on a belt, clip it to my pocket, hang it off a ladder or the side of a cart.

    I highly recommend this tool pouch.

  11. Rated 4 out of 5

    Dropkickmaki (verified owner)

    Sturdy construction, good pouch. I have only one negative comment. The description says metal connection clip. This is not the case, the clip is plastic. Seems like very breakable. And it does not securely connect to the Tech MCT tool bag tape measure clip, as described. Those were two main reasons I bought the pouch.

  12. Rated 5 out of 5


    Great little bag. I used this as a hotel maintenance tech and it worked great to hold all of my daily carry items. I recommend this to anyone needing a small pouch for everyday carry items.

  13. Rated 3 out of 5

    Dubey Ajay

    Good at all so purchase without wasting time

  14. Rated 5 out of 5


    HVAC service tech here, and this is my second veto bag after the tech pac I purchased first. I wanted a small bag for quick diagnostics and small repairs. This was it I’ve had this bag for 2 years it still looking good with minimal signs of wear.

  15. Eric Morales

    This TP 3 is the best pouch I
    This TP 3 is the best pouch I have ever owned in the 30 years that I have been a electrician. I’ve tried many different brands none of them can stand up to this little pouch. It is very well made you can see that they paid a lot of attention to details. Everything on it is heavy duty and the extra protection where you insert your screwdrivers is a nice touch.

  16. Stanley maschavo

    I bought the tp3 its my 3rd
    I bought the tp3 its my 3rd veto bag since i found this brand i will never buy anything thing else, even if it means that i have to wait to save the money to get what i want.

  17. Stew

    Love this pouch its great
    Love this pouch its great holds everything I need on hand for a golf cart tech and has extra room for tools I end up needing and helps me keep track of my tools stops me from losing anything only problem for me is when I have it fully loaded or have it on for a long time is the clip on the back when clip to my belt drives into my leg easy fix with a small towel in my pocket or hanging from my belt great pouch worth the money

  18. Danny

    When recieving this tp3 pouch
    When recieving this tp3 pouch, will the label say Tech Series like the picture shows or HVAC Tech Series?

  19. Tech 58

    This truly is a must have it
    This truly is a must have it holds more tools than expected and truly compliments other bags I have the tec pac and I just clip it on the side for storage and clip it off right onto my belt when needed. The added hadle at the top it much more useful than you would expect. Veto you rock!

  20. Dale C

    I am an HVAC technician and
    I am an HVAC technician and like most people, I am always buying news tools to help make my job easier. I started out with the Pro Pac and added the MB2 shortly after. I thought my collection was complete, until I saw the TP3 and a supply house. I was hesitant to buy it at first but I decided to give it a try and am glad I did. I still use my Pro Pac for major installs, my MB2 for service, where the TP3 helps is on those simple jobs that you know exactly what tools you need. I try to have separate tools for installs and service, so having the TP3 there to quickly grab with just a basic set of hand tools is nice. I would of however chosen the TP4 over the TP3, if it was in stock. Overall I am happy with this bag and am sure another Veto bag will eventually make it’s way into my company van in the future, since my tool collection constantly grows.

  21. yancey

    Was doing a huge install the
    Was doing a huge install the beginning of the summer and needed an open top bag to hold my small tools . I bought this one and its perfect . Only thing missing was a shoulder strap. Quick fix was taking the one off my Tech- LC and i’m off and running all day . Hands down the best brand of bags made!

  22. Brian

    Bought the TP3 as I was
    Bought the TP3 as I was looking for a smaller tool pouch than the one I was using as a Dish Network Technician. This pouch is PERFECT. Best thing about it is it has a belt hook so you can hook it to your belt and not have to worry about using a separate belt for it. A+++++

  23. Great pouch, Fred the control guy.

    I bought the Tech XL. When
    I bought the Tech XL. When registering I seen the T3 Pro and just had to have one. It is fan tastic when climbing up ladders and roof hatch ladders. Every tech knows what a pain it is getting tools up the ladder. No more ripped pockets snagging channel locks and screw drivers on ladder roof hatch guards. It makes it much safer and less time consuming when trouble shooting system in bad places. They always put our equipment in tight places. Oh yes my truck seats have holes from control screw drivers left in my back pocket, not any more.

  24. Dale

    I work in a large facility as
    I work in a large facility as the Facilities Manager.My responsibilities are many from A to Z. I was always looking for the right combination to carry what I need on a daily basis. This LC bag is it, and now the search is over! The LC carries everything I need and then some. I also use the Veto Meter Bag and Meter Pouch, which I keep one clipped to the tape measure holder on one end of the LC and the other is clipped in the small pen holder pouch on the other side of the LC. This way I can customize what I may need for a specific task. Veto Products are top notch and well thought out.The overall construction and durability are well worth the price point.

  25. Bret Wooten

    This is the third product I
    This is the third product I have purchased from veto. All have been of superior quality and design. I have a meter bag and the backpack as well. I am more than impressed with how they’ve held up. I realize the price point is fairly high but frankly you get what you pay for. These are premium bags that will last a long time I use mine daily and have not had one issue in the past year. Here’s a quotable bit for your “The one tool I use everyday in my toolbox is my toolbox.” This is the first tool bag that has crossed the one year mark for me I work hard and need my tools to do the same. All three of the product I purchased from veto are worth the money I paid, I would recommend them to anyone, except my competition:)

  26. ColmD

    Very Happy with the size and
    Very Happy with the size and quality of this little pouch. Use it all the time carries enough to diagnose any fault. Only carry the tools I need most if it was bigger I would be carrying tools I rarely use or didn’t need on every call

  27. Deane

    I received this item through
    I received this item through the “spring promotion”

    shipping was great and fast. No issues at all! Packing was great and we’ll cared for. No defects or issues.

    I have now use this for over a month in the field with my tech backpack and I must say it is very nice to have something smaller and portable for those “quick fixes” or smaller jobs.

    The quality is amazing and it definitely shows. All the stitching is done very well, and the fabric is a very tough material. I have  0 complaints with my product and highly recommend it to anyone.

  28. jeffcoat

    Stop wasting money on cheap
    Stop wasting money on cheap bags. This is the best bag i have owned in my 24 years of being a commercial hvac service tech. has lots of space and easy to handle. Couldn’t ask for anything more.

  29. J-man

    Bought the Tech-XL and
    Bought the Tech-XL and received the TP3 for free. This is a great little tool pouch. With my parts cart and the TP3, installing pipe and trim-out its great. It holds quite a bit for its size. Put what you need in it for the task and go. Makes for a lighter and more compact set up. Thats a good thing when up and down ladders and crawl spaces all day. For instance when running 3/4″ & 1″ EMT. I hold 1 or 2 pairs of Channel Locks, three nut drivers, torpedo level, straight screw driver, reamer screw driver, 3/8″ and 7/16″ small ratchet wrenches, sammy driver, a few impact driver bites and a Sharpie. You could fit a few more things but then I would just wear my full set of bags. Even less when doing trim work. If your not needing full tool bags and use your back pants pockets, this would be for you. This is a perfect size pouch for what I need. Not to big and not to small. It would be nice if Veto made a TP4 version size parts pouch for screws, straps, fittings, etc. This would be perfect set up for tight spaces.

  30. Dagan

    This is my “first assault”
    This is my “first assault” tool pouch. I carry the basics for troubleshooting or minor adjustments/repairs. If the job requires more, I go back to the truck for my OT XXL. When it’s time for ladder work I just pack what I need in my TP3 and put it on my belt.

  31. Zlabar

    Great as a grab and go bag
    Great as a grab and go bag right off the truck for when you only need the essentials

  32. rustytool

    I do residential hvac
    I do residential hvac installations and do on call every few weeks. I had all my hand tools stuffed in a bag and every time I was on call makeup a second smaller bag for that purpose. The downside being every time I needed my meter, wire strippers, flashlight, etc…during the day I would be running to the van to get my on call bag or a certain tool. A few weeks ago I bit the bullet and bought the veto lc. Loved it the first day I used it. But again the same issue when on call, dividing my tools just to have to pull out the on call bag time and time again during the day. Now this past week i was on call again and recieved the tp3 in the mail as part of the promotion. This bag is perfect. I have my multimeter, nutdrivers, and other basic service tools that I use occasionally on installations in the tp3. By clipping the tp3 to my lc I can bring the majority of my hand tools in during the day and already have a service bag on hand for on call.

    A lot of people in the building trades. Hvac, carpenters, electricians, etc. Tend to spend money on quality tools but over look the tool bags, which now I realize is just as important.

    Believe me when I say I will never go to another company for tool bags. Veto makes an outstanding product and there customer service is to notch. You will not be disappointed with any veto product

  33. Rustytools

    This is by far the best small
    This is by far the best small tool pouch that I have had. I have 4-5 other bags from other companies and they all had pros and cons. The TP3 had no cons for me. It hold tools securely has plenty of room for a small bag. good quality, not too heavy but will stand on its own when set beside you. nice handle for carrying when not used on your belt.

  34. ServiceShopToday

    I went to this bag because
    I went to this bag because the bag I have needed to be replaced often. I lost tools and always had issues with pocket size. I really like my new bag allot. Everything is organized and in view. Very happy customer.

  35. John K

    I purchased this in
    I purchased this in conjunction with the Laptop XLT. When I simply do not need many tools but also do not want the pockets of my coveralls full of tools, I decided this was a good option. Before buying this I was losing tools which fell out of my pockets while climbing stairs or kneeling. Most of the time I heard something fall, but occasionally a tool fell through a grating and was much more difficult to reach.

    I also found that although I designated specific pockets for specific tools that I would always put the tool into the wrong pocket. When I needed the tool again I had to search all of my pockets because I could not remember what I had actually done with the tool.

    The TP3 allows me to keep the tools out of my pockets, keeps them all visible, and as long as I can hang the TP3 nearby then all of my tools are within reach.

    One note: Mine came with two handles, but no tape holder. I am not sure why, but I do not need the tape holder. With the tools out of my pockets, I can keep the tape in my pocket.

  36. Tyler

    This is an awesome addition
    This is an awesome addition to my veto pro pac arsenal. I own 3 veto pro pac bags so far and this one definitely didn’t disappoint! I either clip it on my belt or to one of my other bags depending on the repair I have to make. As an HVACR mechanic I need to have fast access and be able to see all my tools. Must be organized and everything has to have its place. With veto I can do just that. Keeps me organized and tough enough to withstand daily abuse on the job. My search for new tool bags is over now that I’ve owned a pro pac. Never will I purchase another brand again! Thanks Veto for your outstanding products!

  37. presseaultcp

    Good choice for thecnician
    Good choice for thecnician

  38. Clint

    My company installs packaging
    My company installs packaging machinery so we use a lot of wrenches, levels and other hand tools. We also have to carry around nuts, bolts and washers. The TP3 is one of the better belt carries. I like the simple clip that lets me quickly remove it. It also has a nice belt loop. The compartments hold there shape and allow for easy access to everything stored in the belt.

  39. HAVC Moss

    perfect for trouble shooting
    perfect for trouble shooting calls, working above ceilings and in crawlspaces. take the tools you need for the job at hand.

  40. HVAC/R Mike

    just put in a few essential
    just put in a few essential tools and it makes a great little diagnostic bag !!!

  41. Al the control guy

    I really like the way I can
    I really like the way I can quickly remove this bag from my Tech XL, and have it clipped to my belt. With my old tool pouch, I wasn’t able to carry a DMM with me, but with the TP3, now I always have one with me. They only thing I would change, would be to have a tape measure clip on it. A tape measure clip, would also be nice on the TP4.

  42. Local399Guy

    I own the Tech LC and use the
    I own the Tech LC and use the TP3 as a everyday carry bag for maintenance work/troubleshooting around a 300,000 SQFT property. It fits what I need and if I need more than that. I get the cart and the Tech LC bag. The TP3 is very easy to overload because it has so many pockets. Belt clip is very strong but IMO is only good for a quick ladder climb or storage on Tech LC bag. I wish it came with a shoulder strap. I use my strap from the Tech LC for this. Works really nice. Not perfect but it works.

    Proud Union Operating Engineer LOCAL 399

  43. matt

    Purchased this to use as a
    Purchased this to use as a grab bag and it works great for diagnostics and trouble shooting. You can fit most of the tools in it you need to make most repairs.

  44. rb086

    I received this product free
    I received this product free with the purchase of a Tech XL tool bag, is a very nice addition to the bag. Excellent bags from an excellent company!

  45. Moz

    Purchased this to go with the
    Purchased this to go with the TECH LC bag and love it,

  46. Maurice

    Bought this along with the MB
    Bought this along with the MB bag to compliment my Tech LC.
    Strong little tool pouch that can carry a surprising amount of smaller tools, ideal for quick fault finding/ service jobs, without carrying the bigger bags about. Also handy when working up ladders etc. very secure belt hook that also fixes easily onto Tech LC.

Add a review