Find A Dealer

TECH-XXL

From $309.99

Optimized for technicians & installers, the TECH-XXL has 25 vertical interior pockets that are capable of storing a large assortment of tall hand tools for sheet metal or mechanical work. The V-SWAP™ system enables reconfiguring of the interior vertical pockets and/or the addition of other Veto pocket accessories. Comes with Tool panel and Bulk Storage panel. Veto’s Padded Insert Box can also be used with this bag. The V-SWAP panels may only be used in front side of the bag, and only one panel may be used in the bag at a time. The back bay of the TECH-XXL provides ample volume to store 3-4 cordless tools, extra batteries and even a charger. Additional panels may be purchased separately.

- +
Add to Compare

Description

EXTRA LARGE TECH INSTALLER’S TOOL BAG

Optimized for technicians and installers, the TECH-XXL’s 25 vertical interior pockets are capable of storing a large assortment of tall hand tools for sheet metal or mechanical work. The V-SWAP™ system enables reconfiguring of the interior vertical pockets and/or the addition of other Veto pocket accessories. The back bay of the TECH-XXL provides ample volume to store 3-4 cordless tools, extra batteries and even a charger. The XXL base is ideal for attic install and duct work, as the 25″/63cm base easily spans standard joist spacing.  Additional panels may be purchased separately.

Specification

PRODUCT SPECIFICATIONS:

  • Height (H): 13" (33cm)
  • Width (W): 26" (66cm)
  • Depth (D): 10" (25.5cm)
  • Handle Height (HH): 20.5in/52cm
  • Weight (empty):  11.5 lbs/5 kg
  • Internal Volume: 1480in3/24L
  • Max Payload: 50lbs/23kg

MAXIMIZED TOOL STORAGE CAPACITY:

  • Extra large front & back zippered storage bays to keep tools safe & secure
  • V-SWAP™ removable & customizable tool pocket panel system with alternate tool panels available & sold separately
  • 18 exterior pockets of varying sizes
  • Up to 25 interior vertical tool pockets of varying sizes available on the front
  • Extra large open bulk storage area in back bay for larger tools & equipment
  • Waterproof Polypropylene plastic base for moisture and abrasion protection
  • Metal YKK® locking zippers
  • 8” Electrical tape strap
  • Interior gray pockets for better visibility
  • 56" Extra Padded Shoulder Strap with Clip
 

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)

TECH-XXL PRODUCT SHEET

Additional Information

Weight 11.5 lbs
Dimensions 26 × 15 in

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!

Download The Product Sheet of

Video

There are no videos available for this product

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TECH-XXL”