TA-WBX Waist Apron With Boxed PocketsVPP10054
Rated 4.00 out of 5 based on 1 customer rating
(1 customer review)


The TA-WBX is a waist tool apron, just like the TA-WB, but built with “Box” shaped pockets to accept plastic insert boxes to differentiate fasteners and help empty contents.

In stock

- +
Add to Compare


The TA-WBX is a waist tool apron, another form of tool storage, just like the TA-WB, but built with \”Box\” shaped pockets to accept plastic insert boxes to differentiate fasteners and help empty contents.



  • Height: 10" (25.5cm)
  • Width: 22.5” (57cm)
  • Depth: 3" (7.5cm)
  • Weight (empty): 1.5lbs (.5kg)
  • Max Payload: 15lbs (7kg)
  • Waist Size Range: 33" - 48"


  • Vertical Tool Pockets: 8 Tool Pockets
  • 2 Fastener "Box" Pockets With Plastic Insert Boxes To Differentiate Fasteners
  • 10 Pencil, Punch & Bit Pockets
  • Metal Tape Measure Clip & Tape Pocket
  • 2 Hammer Holder Loops For Left & Right Handed


  • Tough, Durable Polyester Canvas


Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information


Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!

Download The Product Sheet of

Video & Product Sell Sheet

1 review for TA-WBX Waist Apron With Boxed Pockets

  1. Rated 4 out of 5


    The TA-WXB apron is a great option for most trades. As an Electrician its great for carrying standard hand tools and keeping them flat against your body. the two box pockets are again great for organizing and stopping staples tearing up pouches, they do fill up with wood chips and fillings when drilling (especially when using a hole hawg). The big negative of this product is the built in belt, it makes the apron so long you can barely learn over and have to fight to kneel down while it digs into you! I found folding the belt over made a big difference, but due to the clip being sewn in I had to cut and sew the strap so it faces the other way.

Add a review